Marantz LC1500 manual Press the channel 5,∞ buttons to select current hour

4 Press the channel (5,∞) buttons to select current hour.

●If you hold the 3 button, the hour display is changed in the sequence of AM 1 ➔ AM 2

➔....PM12 ➔ PM 1 .... ➔ AM 12, and changed in the reverse sequence for ∞ but- ton.

●Select [AM 10].

5 Press the volume (3) button.

Clock	10:00AM
Off-Timer	--:--AM Hold
On-Timer	--:--AM
TV 3 Vol 30 Run
Auto Off	: Hold

Use 5∞2 3 And ENTER

6 Press the channel (5,∞) buttons to select current minute. And press the ENTER button.

●If you hold the 3 button, the minute display is changed in the sequence of 00 ➔ 01 ➔ 02

...58 ➔ 59, and changed in the reverse sequence for 3 button.

●Select [30] and press the ENTER button to complete the setting.

●Time is progressed from the point of press- ing the ENTER button.

●Press the ENTER button again and the screen display is disappears.

206-3652

To check current channel, time and

sound status (stereo or dual)

●Press the ENTER button.

ST.SAP 7	current channel
	current sound
	status
10:30AM	current time

●Press the ENTER button again to release.

* Current time is not displayed if current time is not set.

* Stereo or dual sound is displayed only when receiving the correspondent input signal.

*Above displays disappear after a few sec- onds.

CLOCK SETTING

35