Hasselblad X5, X1 user manual

Page 20

© 2006 Hasselblad A/S. All rights reserved.

Flextight X1 / X5 User’s Guide, Part No 75020123, revision 1.3

The information in this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Hasselblad A/S.

Hasselblad A/S assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. Hasselblad A/S assumes no responsibility or liability for loss or damage incurred during or as a result of using Hasselblad software or products.

Hasselblad, Imacon, FlexColor and Flextight are trademarks of Hasselblad A/S. Macintosh, Mac OS and FireWire are registered trade- marks of Apple Computer, Inc.

Image 20
Contents Flextight X5 English v/1.3 Table of contents Page Preventive maintenance System requirementsParts and components − front panel Parts and components − cutaway view Setting up the scanner Installation procedure − FireWire interfaceEnvironmental requirements Electrical requirementsB C Been properly installed Operating instructionsResolutions Calibrating the scanner Select Focus Calibration from the Maintenance menu Focus calibrationUse the procedure below to make a White Calibration White calibration for reflectivesLight tubes Replacing the light tubesPress Pull OUT Disposal Cleaning the external surface of the scannerTechnical specifications FCC Notice CE Declaration of conformity CE Declaration of conformity