Onkyo C-7030 Connecting the CD Player, Audio Connections, Connection Color Coding

Connecting the CD Player

Audio Connections

•Before making any connections, read the manuals supplied with your other components.

•Don’t connect the power cord until you’ve completed and double-checked all connections.

Connection Color Coding

RCA-type audio connections are usually color-coded: red and white. Use red plugs to connect right-channel audio inputs and outputs (typically labeled “R”). Use white plugs to connect left-channel audio inputs and out- puts (typically labeled “L”).

	Analog audio
Left (white)	cable	Left (white)
Right (red)		Right (red)
• Push plugs in all the way to		Right!
make good connections (loose
connections can cause noise or
malfunctions).

Optical/Coaxial Digital Jack

The unit supports 16 bit, 44.1 kHz PCM signal digital output.

The C-7030’s optical digital jack has a shutter-type cover that opens when an optical plug is inserted and closes when it’s removed. Push the plug in all the way.

Caution: To avoid damaging the shutter, hold the optical plug straight when inserting and removing.

Note:

Do not put anything on top of the C-7030, as it may inter- fere with proper ventilation.

• To prevent interference, keep

Wrong!

audio cables away from power cords and speaker cables.

Disconnect the power cord before making

any connections!

RCA/phono

audio cable

(supplied)

	Optical digital			Connect one or		Optical digital
				the other
	cable (not					cable (not sup-
			Coaxial cable		Coaxial cable
	supplied)					plied)
			(not supplied)		(not supplied)
CD	Optical IN	Coaxial IN	Connect one or		Coaxial IN	Optical IN
	Hi-fi amp, AV receiver		the other		CD-R, MiniDisc, DAT recorder

En-13