Onkyo TX-NR900E manual Configuring Various Settings, Network Setup Menu

Configuring Various Settings

Navigating through the Setup Menu:

Be sure to press the RCVR button before using the remote controller.

1.	Press the SETUP button.
2.	Using the	and cursor buttons, select the menu
	that you want to enter.
3.	Press the ENTER button to enter the selected menu.
4.	Use the	and cursor buttons to select the sub-menu
	that you want to enter and press the ENTER button.
	Each sub-menu has different settings that can be changed as desired,
	and they are all explained in the pages that follow. To change a
	setting, first select it using the		and cursor buttons, and then
	change the setting using the and		cursor buttons.

Network Setup Menu

Before you can use the TX-NR900/900E to play music contained in the music library on the Net-Tune server and listen to Internet radio, you must correctly configure the TX-NR900/900E’s network settings so that it can connect to your LAN and the Internet.

It is strongly recommended to use a broadband connection (via an xDSL or CATV leased line) and a router. If you are connected to the Internet via a narrowband dialup connection, you may not be able to enjoy Internet radio as you expect or at all.

Before setting up the TX-NR900/900E, make sure that you are already using a router that provides Internet access and that the TX-NR900/900E is correctly connected with your router or hub via a LAN cable.

For more information on Internet connectivity, consult with your ISP (Internet Service Provider) or refer to the documentation of your router.

5. Press the RETURN button to set the new settings and

return to the previous menu screen.

Press the RETURN button again to return to the main menu.

Input Setup Menu (When NET AUDIO is selected as the input source)

When NET AUDIO is selected as the input source, you can set up Music Server on this screen.

2-1.Music Server	2-2.Playback OSD Display
Input:NET A	Input:NET A
a.Select Server	a.Playback OSD Display
:My PC-ABCDE	:Full
→OK
Quit:SETUP	Quit:SETUP

2-1. Music Server Sub-menu

a. Select Server

Select a network server that exists on the network.

*mark appears to the servers detected on the network. If there is a server

which does not have * mark, make sure that the server is started.

After selection, use the button to select “→ OK”, and press the ENTER button to confirm your selection.

2-2. Playback OSD Display Sub-menu

a. Playback OSD Display

Advanced Menu

5.Network Setup

5-1.IP Address
1.Speaker Config
2a..SpeakerDHCP/AUTODistance-IP		:On
3b..LevelIPAddressCalibration
4.Bass:192Peak.168Level.9. 62
c.SUBNET Mask
:255.255.255.			0
d.Gateway
:192.168.	9.		1
DNS ServerENTER Quit:OSD
e.1st:210.134.143.			7
f.2nd:125. 40.104.			0

Advanced Menu

5.Network Setup

1.IP Address 2.Proxy Setup 3.MAC Address 4.Client Setup

→Save settings

ENTERQuit:SETUP

Advanced Menu

5.Network Setup

5-4.Client Setup

1.Speaker Config

2

.Speaker.ClientDistanceName

3.Level:TX-CalibrationNR9000102

4b..BassWakeupPeakonLevelLAN

:On

uit:Oc.NTSPDPort

:XXXXXX

Quit:SETUP

Advanced Menu

5.Network Setup

5-2.Proxy Setup 1.Speaker Config 2.Speaker Distance

3a..LevelProxyCalibrationServer 4.Bass Peak Level :On b.Proxy Address

c.Proxy Port

: 8080

ENTER Quit:OSD

Quit:SETUP

Advanced Menu

5.Network Setup

5-3.MAC Address

1.Speaker Config

2

.Speaker.MACAddressDistance

3.Level:XX:XX:XX:XX:XX:XXCalibration

4.Bass Peak Level

Quit:OSD

Quit:SETUP

Full: Select this when you want to have the OSD display the information on the currently played track.

Simple: Displays the current track information summary in two lines.

Off: Select this when you do not want to have the information displayed on the OSD.

DHCP (Dynamic Host Configuration Protocol) and AutoIP are mechanisms for network configuration, which assign IP addresses automatically to the network devices such as the TX-NR900/900E, PC, and broadband router.

DNS (Domain Name System) is a mechanism which translates domain names into IP addresses or vice versa. Domain names such as www.onkyo.co.jp are used for Web browsing, and IP addresses such as 210.199.170.69 are used for actual network data transfer.

6