Gateway HG256S quick start WPA-PSK/WPA2-PSK

Page 8

Step 5 Set the Security Mode to WPA-PSK,WPA2-PSK or

WPA-PSK/WPA2-PSK.

The WPS function can be used only when the security mode of the WLAN is set to WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK.

Step 6 In WPA Pre-Shared Key, enter a WLAN access password. Step 7 Select AES for WPA Encryption.

Step 8 Click Submit.

Step 9 Press the WPS button to enable the HG256s to start the WPS negotiation.

Step 10 Enable the WPS negotiation function of the wireless network adapter on your PC within two minutes, and then wait for a moment (typically 10s).

The WLAN indicator of the HG256s becomes on from the blinking state, indicating that the HG256s is connected to your PC through the WLAN.

For more information about the functions and the configuration of the HG256s, please see the User Guide contained in the CD-ROM.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Introduction Front Panel of the HG256sRear and Side Panel of the HG256s Installation Guide Getting StartedConfiguring the Wireless Network Connection Setting Up a Wireless Connection ManuallyPage Setting Up a Wireless Connection by the WPS button Page WPA-PSK/WPA2-PSK Configuring the Wlan MAC filtering Page Page Click Wlan Filtering and select Enable Click Submit Trademarks and Permissions
Top Page Image Contents