8.15.2 Setting delay time
1.Press [MENU] on the remote control or control panel to enter the setting menu.
2.Press [] or [] to the [Storage] menu.
3.Press [] to find [Delay].
4.Press [] or [] to select image switch mode between [0.5 Sec / 1 Sec / 3 Sec / 5 Sec / 10 Sec / Manual].
5.Press [MENU] to exit.
8.15.3 Activating/Stopping the slide show
<Note> Images over 8 MB, cannot be played.
If you use the remote control or the control panel:
1.Press [SLIDE SHOW] to start playing.
2.Press [SLIDE SHOW] again to stop playing.
8.16I would like to view the X-ray film
1.Place an
2.Press [Lamp] button on the control panel to switch on the Backlight (in the sequence of arm lamp/backlight/OFF)
3.Press [AUTO TUNE] button to optimize the image.
8.17I would like to compare images (PBP)
This function will compare and contrast a live image with a captured image.
C1 | C2 |
C3 | C4 |
C5
C6
C7
Captured Image Live Image
Use Remote control
1.Press [PBP] to enter the PBP (Picture by Picture) photo selection screen.
2.Press [] or [] or [] or [] to select the file to be compared.
3.Press [ENTER] to activate image comparison.
4.Press [] or [] to move the image left or right.
<Remark> Press [ENTER] to switch between the captured and live images.
English - 27