Gateway CG3000D-1CXNAS user manual Configuring Universal Plug and Play UPnP, To configure UPnP

Page 36

Wireless Cable Gateway CG3000D-1CXNAS

Remote Management

Description (Continued)

Settings (Continued)

 

Revert to factory default

Allow Remote management after Factory Default Reset

settings

 

 

 

IP Address to connect this

 

device

 

 

 

Allow Management via Telnet

You can select LAN interface (local managemetn), CM Interface (remote

Allow Management via SSH

management), or WAN Interface (remote management) in order to connect

 

to the gateway from the Internet. The correct port number must be used

 

when connecting

 

 

Configuring Universal Plug and Play (UPnP)

Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, access the network and connect to other devices as needed. UPnP devices can automatically discover the services from other registered UPnP devices on the network. With UPnP you can specify:

•Advertisement Period. This specifies how often the gateway broadcasts its UPnP information. The default is 30 minutes. Lower numbers ensure that control points have current device status at the expense of additional network traffic. Larger numbers may compromise the freshness of the device status but can significantly reduce network traffic.

•Advertisement Time to Live. The time to live for the advertisement, measured in hops (steps) for each UPnP packet that is sent. A hop is the number of steps that are allowed to propagate for each UPnP advertisement before it disappears. The number of hops can range from 1 to 255. The default value for the advertisement time to live is 4 hops, which should be fine for most home networks. If you notice that some devices are not being updated or reached correctly, you might need to increase this value slightly.

To configure UPnP:

1.In the main menu, under Advanced, select UPnP.

2.Select the Turn UPnP On check box. The default setting is disabled, which prevents the gateway from allowing any device to automatically control of its the resources, such as port forwarding.

3.Fill in the Advertisement Period and Advertisement Time to Live fields.

The UPnP Portmap Table displays the IP address of each UPnP device that is currently accessing the gateway and which internal and external ports of the

36 Chapter 4: Advanced Settings

Page 35 Page 37
Image 36
Page 35 Page 37
Contents CG3000D-1CXNAS Technical Support NETGEAR, Inc Table of Contents Troubleshooting Connecting to the Internet Gateway Front Panel DescriptionButton Description Gateway Rear Panel Logging Into Your GatewayTo log in to the gateway Gateway Status screenViewing the Basic Settings To view or configure the basic settingsWireless Configuration Setting Up Your Wireless NetworkManually Configuring Wireless Settings WPA or WPA2 Wireless SecurityTo view or configure the wireless settings To set up WPA or WPA2 wireless security WEP SecurityUsing Push N Connect WPS Wireless Setup To set up WEP wireless securityUsing the WPS Button To use the WPS buttonUsing a PIN Wi-Fi Multimedia To set up Wi-Fi MultimediaAdvanced Wireless Settings Advanced Wireless Settings DescriptionStart Configure Button Access Control by MAC AddressTo control access based on MAC addresses Wireless Cable Gateway CG3000D-1CXNAS Managing Your Network Viewing the Gateway Status Modem Status Field DescriptionChanging Passwords Viewing the Connection StatusBacking Up and Restoring Your Settings To change the passwordTo save or restore the backup settings Viewing the Event Log To see the event logRunning the Diagnostic Ping Utility To use diagnosticsAdvanced Settings MAC Filtering To stop blocking a computerTo set up IP filtering IP FilteringPort Blocking Port Forwarding To configure port triggering Port TriggeringConsiderations for Port Forwarding To set up a DMZ host DMZ HostLAN IP Setup To configure LAN IP settingsRemote Management Reserving an IP Address for Dhcp UseTo reserve an IP address for Dhcp To configure the gateway for remote management Remote Management Description SettingsConfiguring Universal Plug and Play UPnP To configure UPnPWireless Cable Gateway CG3000D-1CXNAS Troubleshooting Basic FunctionsConnecting to the Gateway’s Main Menu Using LEDs to TroubleshootLED Behavior Action Troubleshooting the ISP Connection Troubleshooting a TCP/IP Network Using a Ping UtilityTesting the LAN Path to Your Gateway Testing the Path from Your PC to a Remote DeviceWireless Performance and Gateway Location Factory Default Settings Factory Default SettingsDefault WPA/WPA2 passphrase is Technical Specifications Technical SpecificationsRelated Documents Document LinkNotification of Compliance Europe EU Declaration of Conformity FCC Requirements for Operation in the United States TBD Index Index

CG3000D-1CXNAS specifications

The Gateway CG3000D-1CXNAS is a versatile modem and router designed to provide high-speed internet connectivity to homes and small businesses. This device stands out due to its combination of advanced features, robust performance, and user-friendly design.

One of the primary features of the CG3000D-1CXNAS is its DOCSIS 3.0 technology. This enables the modem to support high-speed data transfer rates, making it ideal for today’s streaming-heavy lifestyles. With download speeds that can reach up to 1 Gbps, users can enjoy uninterrupted video streaming, online gaming, and fast file downloads.

The CG3000D-1CXNAS also includes a built-in dual-band wireless router, which allows it to operate on both the 2.4 GHz and 5 GHz bands. This dual-band capability ensures that it can accommodate multiple devices, providing a stable connection while optimizing speeds for various activities. The 2.4 GHz band is perfect for longer ranges and devices that require longer battery life, while the 5 GHz band offers faster data rates for activities like HD streaming and online gaming.

Moreover, this model features four Gigabit Ethernet ports, providing options for wired connections to devices such as computers, gaming consoles, and smart TVs. Gigabit Ethernet ensures that users get the fastest wired connection possible, which is especially important for high-bandwidth activities.

Security is another essential aspect of the Gateway CG3000D-1CXNAS. It includes built-in firewall protection, which helps safeguard the network against unauthorized access. Additionally, the router supports WPA/WPA2 encryption protocols to ensure that wireless connections are secure.

The user interface of the CG3000D-1CXNAS is straightforward, allowing users to easily manage their network settings. The device offers the capability to configure various network options such as parental controls, guest networks, and bandwidth prioritization, making it easy to tailor the network to individual needs.

In summary, the Gateway CG3000D-1CXNAS is a high-performance modem and router that combines advanced networking technologies with user-friendly features. Its DOCSIS 3.0 capabilities, dual-band wireless support, multiple Ethernet ports, and robust security measures make it an excellent choice for anyone looking to enhance their internet experience. Whether for work or leisure, this device provides the speed, reliability, and security necessary for today’s connected world.
Top Page Image Contents