GR160 F1 specifications
Technical specifications
PCIe® specifications
The primary I/O bus for the main board is PCIe Gen2. The following table lists the characteristics of the
NOTE: The signaling bit rate of PCI Express is 2.5Gbit/s one direction per lane for Gen 1 and 5.0Gbit/s one direction per lane for Gen 2.
Expansion | Number | Type | Bus | Voltage | Connector | Location | Length |
slot |
|
| width1 |
|
|
|
|
PCIe x16 | 1 | PCIe | x16 | 3.3V | x16 | Riser, left | Full height |
|
| Gen2 |
|
|
|
|
|
PCIe x8 | 1 | PCIe | x8 | 3.3V | x8 | Riser, | Proprietary |
|
| Gen2 |
|
|
| right | LAN |
Flex I/O | 1 | PCIe | x8 | 3.3V | x8 | Riser, left | Full height |
|
| Gen2 |
|
|
|
|
|
NOTE:
1.Indicates the number of physical electrical lanes running to a PCIe® connector.
2.Default bus assignment (in decimal). Inserting cards with PCI™ bridges may alter the actual bus assignment number.
3.Slots are enumerated differently based on the operating system. Microsoft® operating systems enumerate Device ID by bus starting from the lowest bus to the highest.
Onboard storage specifications
Item
Controller
Simultaneous drive transfer channels Max throughput per channel
Data transfer method
Drive type supported
RAID levels support
RAID function support
RAID OS support
Description
Intel® 82801JR (ICH10R) I/O Controller Hub
6 onboard SATA ports
3Gb/s
•
•RAID mode Serial ATA
•RAID 0, 1, 10, 5 (Intel software RAID)
•RAID 0, 1, 10 (Adaptec software RAID)
NOTE: Intel software RAID only supports Windows OS
Supports multiple logical volumes
Setup through ROM based Array Configuration Utility Installation scripting support
NOTE: This controller does not support LED functions
•Windows Server 2008
•Windows Server 2008 R2
•Windows Server 2003
•Red Hat Enterprise Linux 5.4
5