Onkyo HTX-22HD instruction manual Sync, Music Optimizer, Name Edit

Advanced Setup—Continued

A/V Sync

When using your DVD player’s progressive scanning function, you may find that the pic- ture and sound are out of sync. With the A/V Sync setting, you can correct this by applying a delay to the audio signal. The delay can be set from 0 to 100 milliseconds (msec) in 10 millisecond steps.

Use the Left and Right [ ]/[ ] buttons to set the delay.

To view the TV picture while setting the delay, press [ENTER].

If HDMI Lip Sync is enabled (see page 68), and your TV or display supports HDMI Lip Sync, the displayed delay time will be the A/V Sync delay time. The HDMI Lip Sync delay time is displayed underneath in paren- theses.

Note:

•A/V Sync is disabled when the Direct lis- tening mode is used with an analog input source.

Music Optimizer

The Music Optimizer function enhances the sound quality of compressed music files. Use it with music files that use “lossy” compres- sion, such as MP3.

Off: Music Optimizer off (default).

On: Music Optimizer on.

Note:

•The Music Optimizer function only works with PCM digital audio input signals with a sampling rate below 48 kHz and analog audio input signals. The Music Optimizer is disabled when the Direct listening mode is selected.

Name Edit

You can enter a custom name of up to 10 characters for each input selector. When an input selector with a custom name is selected, the custom name will be displayed instead of the default name.

1	Select the input selector to
	which you want to give a cus-
	tom name.
2	Press the [SETUP] button.

3	Use the Up and Down [ ]/[ ]
	buttons to select “4. Source
	Setup,” and then press
	[ENTER].

4	Use the Up and Down [ ]/[ ]
	buttons to select “Name Edit,”
	and then press [ENTER].

5	Use the Up and Down [ ]/[ ]
	buttons to select a character,
	and then press [ENTER].

The character is set and the cur- sor moves one place to the right.

65