JVC HR-S8700EU specifications Turn Off Navigation, Video Navigation Title Screen, Check the memory

Page 41

EN 41

C Check the memory.

Press rt to move the highlight bar (pointer) to “CHECK MEMORY”, then press OK.

● The CHECK MEMORY screen will appear.

D Return to the normal screen.

Press MENU.

Turn Off Navigation

If you do not want to record information on the programmes, set “NAVIGATION” to “OFF”.

Perform steps 1 to 2 of “Check Memory” on page 40 before continuing.

A Turn off Navigation.

Press rt to move the highlight bar (pointer) to “NAVIGATION”, then press OK or e to set to “OFF”.

B Return to the normal screen.

Press MENU.

Video Navigation Title Screen

ATape number

BTape title

If there is no tape title entered, the earliest recording date will be displayed.

CCurrent page number/total page number

DLargest blank space on the tape

(Calculated remaining time based on the current tape speed (SP, LP or EP) selected on the recorder)

EProgramme information

(Recording start time, date and channel number)

FCurrently selected programme

GCurrent tape position

“*” is displayed if the currently selected programme and the current tape position are different while tape is not running.

HDetailed information of currently selected programme (Recording start time, end time, recording length, recording speed, programme title and category)

If there are no title and category entered, “TITLE” and “CATEGORY” will be displayed.

NOTES:

●Video Navigation is possible with the cassettes recorded with this recorder only.

●To record the date and time as the programme title in this recorder’s memory, make sure the recorder’s clock is set correctly before recording.

●To record the programme information in this recorder’s memory, you must continue to record each programme for over the minimum recording time; 8 minutes for the SP mode, 15 minutes for the LP mode or 23 minutes for the EP mode.

●Video Navigation may not work properly depending on the tape being used.

●If the recorder finds two tape numbers in one tape while playing back or searching for the beginning of a programme, then when you remove the tape, the tape will be assigned just one number (smaller number).

●The programme information is stored in this recorder’s memory. If the memory in this recorder should ever be damaged and the programme information lost, it is impossible to restore that information.

●After recording a tape with this recorder, write the tape number on a label and affix the label to the cassette in order to allow you to find the tape by its number.

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel ON-SCREEN Display Remote Control Remote Control LCD How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TVVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectors12 EN Auto Set UpTurn on the recorder Select your countrySelect the language Perform Auto Set UpPress rt to select your language code Press rt to select Auto and press OK or e14 EN Perform Preset DownloadSet the video channel Press rt to select CH - and press OK or eJust Clock Language for the on-screen displayAccess the Country Set screen Access the Main Menu screenLanguage 16 ENSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections18 EN Setting satellite receivers brand and channelVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link 20 EN Basic PlaybackSlow Motion Variable Speed SearchHigh-Speed Turbo Search Pause during playbackSkip Search 22 ENIndex Search Activate Index SearchDigital TBC/NR Next Function MemoryRepeat Playback Manual Tracking24 EN Tape Remaining Time Instant Timer Recording ITR26 EN Engage the Record-Pause modeRetake Locate the start pointAdjust the audio recording level Engage the S-VHS ET modeSuper VHS ET S-VHS ET Audio Recording Level ControlReceived Receiving Stereo and Bilingual ProgrammesRecording PlaybackAccess the Showview screen Access the Showview displayAccess the Showview Program screen 30 ENEngage the recorder’s timer mode Set the VPS/PDC modeSatellite Receiver Users Guide Program Number Set32 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR+34 EN Confirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenRecording mode Select the L-2 Select modeProgramme Recording 36 ENRemove the power supply Remote A/B Code SwitchingSet the remote control code Re-supply the power38 EN TV Multi-Brand Remote ControlSet the TV brand code Operate the TVOperate the satellite receiver Satellite Receiver Multi-Brand Remote ControlSet the satellite receiver brand code 40 EN NavigationNavigation Playback Check MemoryVideo Navigation Title Screen Turn Off NavigationCheck the memory Turn off NavigationEdit Title Access the Find Blank Space screen42 EN Find Blank SpaceEdit Tape Title Access the Edit Title screenEntering Character Select the tape titleChoice of Category 44 ENSelect the programme Enter the programme titleDelete Programme Data Delete Tape DataDelete the tape data Delete the programme dataFind Title Access the Find Title screen46 EN Sort By Tape NumberAccess the Date screen Access the Tape No. screenSort By Date Select the programme48 EN Access the Category screenSort By Category Category you want to watchSet the edit mode Set the recorder’s input modeEdit From a Camcorder Start the camcorderOutput/Input Set Decoder connector Select and L-2 Input Setting52 EN Another Video RecorderPlayer 54 EN Audio DubbingStart dubbing Engage the Audio Dubbing modeEnd Audio Dubbing Press AUX number key 0 and/or PR to select F-1 or S-156 EN Insert EditingAV Insert Editing Engage the Insert Editing modeLocate the end point Start EditingStart Synchro Editing 58 ENPause Synchro Editing Press Synchro 7/79Jlip ID Number Access the Jlip ID No. Set screenSet the Jlip ID number Simple Connections Connecting To a Satellite ReceiverPerfect Connections 62 EN Select the input modeConnect the decoder Set the tunerMake connections Connecting/Using a Stereo SystemAccess the Mode Set screen Mode SetSelect the mode Select the mode settingThis feature helps you to adjust the playback picture You can set the B.E.S.T. Biconditional Equalised SignalWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder isFor Example 66 ENAbout Ntsc Playback Tuner Set Access the Auto Channel Set screen68 EN Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen Manual Channel Set 70 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations B 72 ENSet Stations a Station Name TV Station And ID ListExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 74 ENGuide Program Number Set Showview System SetupGuide Program Number Enter the Guide Program number76 EN Access the Clock Set screenClock Set Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation78 EN TroubleshootingRecording 80 EN Other ProblemsPlayback 82 EN Synchro Editing Tape Position Indicator Tape Remaining Time Preset DownloadTimer Warning Display Tuner Set Manual Channel Set Manual Tracking Mode SetCountry code International telephone Language code
Related manuals
Manual 84 pages 58.11 Kb

HR-S8700EU specifications

The JVC HR-S8700EU is a notable VHS player and recorder that continues to attract attention for its advanced features and performance. This model has made a significant mark in home entertainment systems, particularly for those who appreciate classic VHS tapes.

One of the standout features of the HR-S8700EU is its high-quality video playback and recording capability. This model utilizes JVC's sophisticated Super VHS (S-VHS) technology, which provides a significant enhancement in image quality compared to standard VHS. The S-VHS format offers improved resolution and clarity, allowing users to enjoy a cinematic experience within the comfort of their homes.

The HR-S8700EU is equipped with a 4-head system, which facilitates both high-quality video playback and recording. This technology ensures that tapes are played back with minimal distortion and greater detail, presenting a smoother and clearer picture. The machine also boasts a feature called S-VHS ET (Enhanced Technique), which allows standard VHS tapes to achieve near-S-VHS quality when played on the HR-S8700EU.

Another significant aspect of the HR-S8700EU is its range of connectivity options. With the inclusion of SCART, RCA, and S-Video outputs, users can easily connect the recorder to a variety of television sets and other devices. This versatility is particularly beneficial for those looking to maintain an extensive VHS library while integrating contemporary audio-visual components.

The user-friendly interface and a comprehensive set of programmable features make the HR-S8700EU a highly practical choice for home use. The built-in timer allows for scheduled recordings, making it easy to capture favorite shows without the need for manual operation. Additionally, the on-screen display provides clear navigation through menus, simplifying the recording and playback processes.

Durability and reliability are also hallmarks of the JVC HR-S8700EU. Designed for longevity, this model features robust construction that ensures it can withstand regular use while maintaining consistent performance. As a testament to its popularity, many users still seek out the HR-S8700EU for its blend of classic technology and dependable functionality.

In summary, the JVC HR-S8700EU is a versatile and enduring choice for VHS enthusiasts, featuring high-quality S-VHS playback, a 4-head system, multiple connectivity options, and user-friendly programming capabilities. With its reliable performance and exceptional video quality, it stands out as a valuable addition to any classic media collection.
Top Page Image Contents