JVC manual IP Address Setting,  3-1 VN-E4with Factory Default Settings

Page 16

Preparation (continued)

3. IP Address Setting

3-1 VN-E4with Factory Default Settings

Refer to START-UP GUIDE on procedures for setting the IP address when VN-E4is in the factory default settings.

3-2 VN-E4for which IP address is known

When the IP address of VN-E4is known, it can be changed by accessing the built-in web page of VN-E4via the PC’s Internet Explorer. See A5. Setting Using Internet ExplorerB.

3-3 When IP address of VN-E4is unknown

When IP address of VN-E4 is unknown, there are 3 methods to know IP address.

a)Use the search tool

The search tool in attached CD-ROM is available to know IP address of VN-E4.Refer readme file of the tool for detailed information.

b)Initialize VN-E4

Pushing [RESET] button on rear panel over 5 seconds initializes VN-E4to factory default setting.

c)Capture packets on network

Perform following procedures to find out the IP address of VN-E4.

1. Configuration for looking up IP address

Set up a PC with the network monitor software installed on it. The network monitor software will capture and look up incoming packets at the PC. An example of free network monitor software that may be obtained from the Internet is Ethereal. Connect VN-E4,the switching hub and PC using a straight LAN cable of Category 5 and above. (Do not connect the DHCP server to the switching hub.)

2. Capturing packets sent by VN-E4

Launch the network monitor software on the PC and start capturing.

Supply power to VN-E4using the AC adaptor. Depending on the settings, the amount of time required for VN-E4to start up may vary from about 1 to 2 minutes. VN-E4will start packet transmission during this interval, and capturing will end in about 2 minutes.

3. Looking up captured packets

If ARP request is sent first by VN-E4

If the following ARP request is sent first by VN-E4,then the destination IP address of this packet will be the IP address of VN-E4.(In this case, the subnet mask of VN-E4is unknown.)

Packet type: ARP request

Source IP address: 100.100.254.169

This ARP request packet is used to check whether there are devices that possess a duplicate IP address with VN-E4.In this case, ADHCPB and APPPoEB of VN-E4are set to AOffB.

If the DHCP Discover packet is sent first by VN-E4

The DHCP client function of VN-E4is set to ON. In a LAN environment without a DHCP server, the DHCP will time out in about 2 minutes after the power is turned on, and VN-E4will be started up using the following IP address.

IP address 192.168.0.2 Subnet mask 255.255.255.0 Default gateway 192.168.0.254

If the following broadcast packet is sent first by VN-E4Destination MAC address 0xFFFFFFFFFFFF Ethernet Type 0x8863

The APPPoEB of VN-E4is set to AOnB. In a LAN environment without a PPPoE server, it will time out in about 2 minutes after the power is turned on, and VN-E4will be started up using the following IP address.

IP address 192.168.0.2 Subnet mask 255.255.255.0 Default gateway 192.168.0.254

4.IP address setting on PC

The subnet mask of VN-E4is unknown when methods 1. to 3. are used to look up the IP address, and there is a possibility that this may be 255.255.255.254.

Set the IP address of the PC such that it is in the same segment with VN-E4.(Example 1) When the IP address of VN-E4is 10.1.2.2

By setting the PC’s IP address to 10.1.2.3 and the subnet mask to 255.255.255.0, they will be in the same segment and communication will be enabled even if the subnet mask of VN-E4is 255.255.255.254.

(Example 2) When the IP address of VN-E4is 10.1.2.3

By setting the PC’s IP address to 10.1.2.2 and the subnet mask to 255.255.255.0, they will be in the same segment and communication will be enabled even if the subnet mask of VN-E4is 255.255.255.254.

Whether communication is enabled may be determined by sending a Ping from the PC to the IP address of VN-E4.

For procedures on changing settings of VN-E4via Internet Explorer on the PC, refer to A5. Setting Using Internet ExplorerB.

16

Image 16
Contents VN-E4 This manual describes the detailed usage of VN-E4Important Safeguards For Continental EUROPE, ETC For U.K. only For Your Safety Please Read the Following Text CarefullyInformation for Users on Disposal of Old Equipment  How to view this manual  Copyrights in this manual Features Copyrights in this manual Features Alarm InputNetwork Input Cautionary Notes  Name and Function of Parts PRS-232C/RS-485COM1, 2 Protocol Selection Switch RCONTROL/SERVICE switchSalarm Output terminal Talarm Input terminalSystem Setup Examples  1-1 Remote monitoring using the built-in viewerNetwork  1-2 Systems that combine other manufacturer’s devices Video Input 1~4Server Requirements for network using VN-E4  2-1 Network BandwidthInput CH Frame Size Picture Quality Control Method VGA File Size Qvga File Size 2-2 Network Delay  2-3 Network Jitter 2-4 Packet Loss  2-5 Use of MulticastIP Address Setting  3-1 VN-E4with Factory Default Settings 3-3 When IP address of VN-E4is unknown  3-2 VN-E4for which IP address is known 4-1 AC Adaptor Connection / Installation 4-2 Network  4-4 Alarm Input  4-5 Alarm Output 4-3 COM1,2 Serial Port Terminals Receiving End 4-6 AV Devices  4-7 Attaching Rack Mount Brackets 4-8 Connection with PC Case of 1 unit. VN-BK10rack mount bracketSetting Using Internet Explorer Setting Up of PC for SettingEnter user name and password User Name Default Password DescriptionAdmin Operator User Settings 5-1 Jpeg View Page Top Reload Button Viewer... Button 5-2 Input  5-3 Encoding Encode NumberQuality Frame Rate 5-4 Alarm Action1st Trigger Max. IntervalMail  5-5 Alarm EnvironmentFTP Motion Detect Setting Chattering Guard TimeOutput Duration Manual OutputOperator Password CH1-CH4ButtonDisplay Screen Detection 5-6 Serial  5-7 Basic  5-8 Details MTU 5-9 Streaming Client Address  5-10 Access RestrictionsAudio Sender  5-11 Time NTP 5-12 Password Current PasswordNew Password Username 5-13 Maintenance SettingsAll Settings UpdateFactory Settings of Input Factory SettingsFactory Settings of Encoding Factory Settings of AlarmFactory Settings of Motion Detection Factory Settings of Alarm EnvironmentFactory Settings of Serial Factory Settings of Basic Factory Settings of Details1420 Negotiation Auto PPPoE Off Username Blank Password Factory Settings of StreamingFactory Settings of Access Restrictions Access Restriction Deny IP Address BlankFactory Settings of Time Factory Settings of Password 5-14 Miscellaneous AppearanceFor changing the web page appearance Manual API GuideDestination  5-15 OperationSystem Log  5-16 Settings Settings This page can be used upon access via AadminB or AoperatorB Using the VN-E4Built-in Viewer  6-1 Screen Configuration of Built-in ViewerPause Button All ButtonOperation  6-2 Built-in Viewer Settings Alarm Event Selection Auto Alarm ClearCancel Button ACH1 RequestB 6-3 GUI for External Device Control Auto PANFocus ZoomW Mode SaveClear MenuSET Digital ZoomSpeed Auto FocusTroubleshooting Specifications OthersInput/Output Compression FormatVN-E4 4ch Network Encoder

VN-E4 specifications

The JVC VN-E4 is a high-performance video camera that has garnered attention for its innovative features and cutting-edge technology. Designed for both amateur enthusiasts and professional videographers, this model showcases JVC's commitment to delivering superior image quality and user-friendly functionality.

One of the standout features of the VN-E4 is its advanced imaging sensor. It utilizes a high-resolution CMOS sensor that captures stunning 4K video footage, providing exceptional clarity and detail. With a wide dynamic range, the camera excels in various lighting conditions, ensuring vibrant colors and deep contrasts. This makes it suitable for diverse shooting environments, from bright outdoor scenes to dimly lit interiors.

The VN-E4 also supports a range of frame rates, including high-speed recording options that enable slow-motion playback. This is particularly valuable for filmmakers looking to add dramatic effects to their projects. With its excellent low-light performance, the VN-E4 allows users to shoot in challenging conditions without sacrificing image quality, making it an ideal choice for events, documentaries, and creative projects.

Equipped with JVC's proprietary image processing technology, the VN-E4 offers enhanced noise reduction and image stabilization. This results in smoother footage, even during handheld shooting or when capturing fast-moving subjects. The optical image stabilization technology is especially useful for reducing the shakiness common in handheld videography.

In terms of connectivity, the VN-E4 is designed with versatility in mind. It includes multiple input/output options, including HDMI and USB ports, allowing for easy integration with external devices. This feature is essential for live streaming and professional broadcasting applications, enabling users to connect to external monitors or recorders seamlessly.

User-friendly controls are another hallmark of the JVC VN-E4. The camera features an intuitive menu system and customizable buttons, allowing for quick access to frequently used settings. The ergonomic design ensures that it is comfortable to hold for extended shooting sessions, making it a practical choice for long projects.

Battery life is another important characteristic of the VN-E4. With energy-efficient technology, the camera can operate for extended periods without frequent recharging, providing peace of mind for videographers on long shoots.

In summary, the JVC VN-E4 stands out for its impressive combination of high-resolution imaging, advanced stabilization, extensive connectivity, and user-friendly design. Whether for creative filmmaking or professional use, this camera provides the tools necessary to capture stunning video with ease and versatility, making it a valuable addition to any videographer's toolkit.