JVC TM-A130SU HOW to USE the Menu, Display and Selections in the SET-UP Menu Mode Setting, Cuto

HOW TO USE THE MENU

FUNCTIONS (cont'd)

DISPLAY AND SELECTIONS IN THE <SET-UP MENU> MODE (SETTING)

You can set the following set-up menu items.

H. POSITION WHITE BALANCE CONTROL LOCK

Note:

Parameters for H. POSITION can be set separately depending on the video input (Input A or Input B) selected by the input select buttons on the front panel.

Select the required video input with the input select buttons on the front panel in advance.

<SET-UP MENU> screen

1		<SET–UP MENU>
	‰	H. POSITION	:	00
		WHITE BALANCE
2		CONTROL LOCK	: OFF

EXIT

3

4

1. While pressing the MENU button, press the

PHASE ( ) button.

The <SET-UP MENU> screen is displayed.

PHASE MENU

2. Press the PHASE ( ) or CHROMA ( ) button to select the desired menu item.

	A selection mark (3) is put next to the selected item.
	Front panel		Function	Contents
PHASE CHROMA	button		displayed
H. POSITION	PHASE (	)	▼	Advance selection mark (3)
WHITE BALANCE	CHROMA (	)	5	Reverse selection mark (3)
CONTROL LOCK

3. Press the VOLUME/SELECT buttons to set.

		Front panel	Function	Contents
		button	displayed
–	+
			+	Increase (to max. value)
		VOLUME/
			3	Advance the setting value
		SELECT (+)
VOLUME/SELECT			CUTO	Selects CUT OFF setting
				screen
		VOLUME/	–	Decrease (to min. value)
			2	Reverse the setting value
		SELECT (–)
			DRV	Selects DRIVE setting screen

Notes:

For the WHITE BALANCE setting, select the CUT OFF or DRIVE setting screen, then select the buttons (PHASE/ CHROMA/BRIGHT) corresponding to the function indicated (R/G/B).

To return to the <SET-UP MENU> screen, press the EXIT (MENU) button.

– +

PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT

<Front panel button>

1Selection mark (3): Indicates the

menu item you select.

2Menu item: Menu items you can select.

3Setting display: Indicates the

current settings (value).

4Function display: The functions of the front panel buttons (7 buttons on the left) correspond to the function displayed.

Function	Contents
displayed
▼	Advance the menu item.
5	Reverse the menu item.
–	Lower the adjustment
	value. (to the minimum)
+	Raise the adjustment
	value. (to the maximum)
3	Advance the setting value.
2	Reverse the setting value.
EXIT	Exit the <SET-UP MENU>
	screen. (release)
DRV	Selects DRV adjustment.
CUTO	Selects CUT OFF
	adjustment.
R	Adjusts red signal level.
G	Adjusts green signal level.
B	Adjusts blue signal level.
	Turns the ON-SCREEN
	display on or off. (This
DISP	function is effective only in
	the DRIVE or CUT OFF
	adjustment mode.)

8