JVC GD-V4200PZW-G, GD-V4200PCE Installation, Precautions, When installing the Monitor on a stand

Page 9

Installation

Precautions

•When mounting the Monitor vertically, it is necessary to adjust the cooling fan speed to provide better heat dissipation. Do not forget to perform this adjustment. (See page 23.)

•When installing the Monitor, be sure to use a dedicated Stand Unit, Wall Mounting Unit, or Monitor Hanger Unit, depending on a particular case. Ask your dealer for installation.

•When installing the Monitor, refer also to the user manual for each option to use. Do not tilt the Monitor rightward, leftward, or backward.

•Route the power cord and connection cables along wall or floor corners to avoid walking on them.

•For good heat dissipation, try to leave the following distances of space (minimum) around the Monitor.

•The ambient temperature of the installation place should be within the range of 0˚C to 40˚C.

•When installing the Monitor in a place, such as near the ceiling, the remote control may not work correctly because of possible effects from the surroundings. If this happens, use the remote control as a wired remote control or move the Monitor where it is free from these effects.

When installing the Monitor on a stand

Front View

 

Side View

 

 

 

200 (77 /8)

 

 

 

50

 

 

(2)

150

150

Wall

(415/16 )

(415/16 )

 

 

50

 

 

(2)

 

 

 

Unit: mm (inch)

Take measures against the Monitor from overturning:

To protect against abnormal events such as earthquakes and to prevent unexpected accidents, take appropriate measures for preventing the Monitor from overturning; should it overturn, this could lead to personal injury.

For detailed information, refer to the manual supplied for the stand.

ENGLISH

When mounting the Monitor on the wall

Front View

Side View

 

200 (77 /8)

100

100

(315/16)

(315/16)

 

50

Unit: mm (inch)

(2)

100 (3 15/16)

When hanging the Monitor from the ceiling

Side View

200

(77 /8)

50

(2)

Unit: mm (inch)

Notes:

• Do not allow the same image (pattern) to be continuously displayed on the screen for a long time; otherwise, the area on the screen corresponding to the image may vary in brightness, leaving an afterimage on the screen. To reduce the afterimage, you can use the White Back function (see page 22).

• The Monitor is manufactured using very high-precision technology, allowing for more than 99.99% active pixels, however, be aware that only a slight number of pixels may be deficient or lit at all times.

• Do not install the Monitor in such a way that the Monitor and other AV equipment affect each other adversely. (For example, if a disturbed image or noise due to electromagnetic interference occurs, or if the infrared remote control malfunctions, change

the installation place.)

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Instructions FCC Notice Safety PrecautionsEnglish Parts Identification Remote ControlSelf-diagnostic lamps Remote sensor/power lampMonitor Front View Menu buttonRS232C Control AC Input Monitor Rear ViewRemote Control terminals mini jack Main Power switchRS-232C Control Input terminal D-sub, 9-pin AC Input terminalChecking the Accessories Installing the BatteriesPreparations Precautions InstallationWhen installing the Monitor on a stand When mounting the Monitor on the wallVideo signals Available SignalsComputer signals Preset and user-defined video modes ConnectionsConnection Examples Daily Operations Basic OperationsPrecautions for using the screen mode switching function Changing the Aspect RatioPress Aspect to select the screen size Adjusting the Screen Size and Position For RGB input onlySIZE/POSITION ADJ Adjusting the Picture Quality To make an adjustment while viewing the adjustment barTo reset the adjustments Press 3 to display the Function To make an adjustment while viewing the adjustmentSelection Menu BarAdjusting the White Balance To reset the settingTo make an adjustment while viewing the adjustment bars Press 2/3 to select an aspect ratio you AspectWant Monitor three times to exit fromFunction Select Setting the Receivable Signal TypesStatus Display Other Convenient FunctionsConfirming the Use Time Setting the Power Saving FunctionConfirm the hour of use Press 2/3 to select the desired amount of timeVolume to display the Setup Menu On the remote controlReducing the Afterimage Effect Press MENU/EXIT while holdingVentilation Mode Using the Screen Saver FunctionResetting All the Setup Menu Settings Mounting the Monitor VerticallyTurn on all the connected Monitors Press Mode Connecting the Remote Control CablesSerial Connections and Operations Assigning ID NumbersPress MENU/EXIT to display the Main Menu Operating the Monitors SimultaneouslyPress MENU/EXIT twice to exit from the menu operations Operating the Monitors IndividuallyMain Menu Menu ClassificationsSetup Menu Auto TroubleshootingYour Name Telephone No Address General SpecificationsInput/output terminals Options not suppliedDimensions Pin assignment Specifications for terminals
Related manuals
Manual 4 pages 29.59 Kb

GD V4200PZW, GD-V4200PCE-G, GD-V4200PZW-G, GD-V4200PCE specifications

The JVC GD-V4200PCE-G, GD-V4200PCE, GD-V4200PZW-G, and GD-V4200PZW are part of JVC's advanced series of professional video display solutions, specifically designed for a range of demanding environments such as broadcasting, production, and high-end presentations. These models excel in providing high-quality visuals and are geared towards enhancing the experience in professional media and broadcast applications.

One of the standout features of the JVC GD-V4200 series is its impressive resolution capabilities. The displays offer high-definition image quality, allowing for crisp visuals and vibrant colors. This is crucial for professionals who require precise and accurate representation of video content. The integration of advanced image processing technologies ensures that even fast-moving scenes are rendered smoothly, with minimal motion blur, making it an ideal choice for live events or sports broadcasting.

Another significant characteristic is the series' robust connectivity options. The GD-V4200 models are equipped with a variety of input interfaces, including HDMI, SDI, and DVI, allowing seamless integration with different video sources and production setups. This flexibility is essential in professional environments where multiple devices are often used interchangeably.

Color accuracy and consistency are paramount in professional video displays, and the GD-V4200 series does not disappoint. With advanced calibration capabilities, users can adjust settings to meet specific color profiles, ensuring that outputs are true to the source material. This is particularly beneficial in situations where color grading and matching are critical, such as in post-production.

Durability and reliability are also key aspects of the JVC GD-V4200 series. Built to withstand the rigors of professional use, these displays feature a robust design that ensures long-lasting performance. The series typically incorporates features such as anti-glare screens, making them suitable for both controlled indoor environments and more challenging outdoor settings.

In summary, the JVC GD-V4200PCE-G, GD-V4200PCE, GD-V4200PZW-G, and GD-V4200PZW are designed for professionals seeking high-performance video display solutions. With their high-definition resolution, extensive connectivity options, exceptional color accuracy, and durable design, these models provide a comprehensive solution for various video production and broadcasting applications, ensuring that professionals can deliver their best work consistently.
Top Page Image Contents