Safety Precautions

Thank you for purchasing this JVC colour video monitor. Before using it, read and follow

all instructions carefully to take full advantage of the monitor’s capabilities.

In order to prevent any fatal accidents caused by misoperation or mishandling the monitor, be fully aware of all the following precautions.

WARNINGS

To prevent ﬁre or shock hazard, do not expose this monitor to rain or moisture. Dangerous high voltages are present inside the unit. Do not remove the back cover of the cabinet. When servicing the monitor, contact qualiﬁed service personnel. Never try to service it yourself.

WARNING : THIS APPARATUS MUST BE EARTHED.

Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.

Improper operations, in particular alternation of high voltage or changing the type of tube may result in x-ray emission of considerable dose. A unit altered in such a way no longer meets the standards of certiﬁcation, and must therefore no longer be operated.

PRECAUTIONS

●Use only the power source speciﬁed on the unit.

●When not using this unit for a long period of time, or when cleaning it, be sure to disconnect the power plug from the AC outlet.

●Do not allow anything to rest on the power cord. And do not place this unit where people will tread on the cord.

●Do not overload wall outlets or power cords as this can result in a ﬁre or electric shock.

●Avoid using this unit under the following conditions:

–in extremely hot, cold or humid places,

–in dusty places,

–near appliances generating strong magnetic ﬁelds,

–in places subject to direct sunlight,

–in badly ventilated places,

–in automobiles with doors closed

●Do not cover the ventilation slots while in operation as this could obstruct the required ventilation ﬂow.

●When dust accumulates on the screen surface, clean it with a soft cloth.

●Unplug this unit from the AC outlet and refer servicing to qualiﬁed service personnel under the following conditions:

–when the power cord is frayed or the plug is damaged,

–if liquid has been spilled into the unit,

–if the unit has been dropped or the cabinet has been damaged,

–when the unit exhibits a distinct change in performance.

●Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Always refer servicing to qualiﬁed service personnel.

●When replacement parts are required, have the service personnel verify in writing that the replacement parts he/she uses have the same safety characteristics as the original parts. Use of manufacture’s speciﬁed replacement parts can prevent ﬁre, shock, or other hazards.

●Upon completion of any servicing or repair work to this unit, please ask the service personnel to perform the safety check described in the manufacturer’s service literature.

●When this unit reaches the end of its useful life, improper disposal could result in a picture tube implosion. Ask qualiﬁed service personnel to dispose of this unit.

SCREEN BURN

●It is not recommended to keep a certain still image displayed on screen for a long time as well as displaying extremely bright images on screen. This may cause a burning (sticking) phenomenon on the screen of cathode-ray tube. This problem does not occur as far as displaying normal video playback motion images.