JVC LCT2141-001A-H HOW to Initialize the Setting, To cancel initialization, Initial settings

HOW TO INITIALIZE THE SETTING

SCREEN DISPLAY AND SELECTIONS IN THE <SET-UP MENU> RESET MODE

You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and the volume level to their factory-set (initial) values.

1.Press the POWER ( ) switch to turn the power OFF ( —).

_ON

—OFF

POWER

<SET-UP MENU> RESET screen

<SET–UP MENU> RESET

Are	you	sure ?
“Yes”	then	<CONTRAST>
“No”	then	<+> or <–>

2.While pressing both MENU button and PHASE ( )

button, press the POWER ( ) switch to turn the power ON (_).

	The <SET-UP MENU> RESET screen is displayed.
_ON	Note:
—OFF
PHASE MENU POWER	● The <SET-UP MENU> RESET screen will not be
	displayed if the MENU or PHASE buttons are pressed
	for a very short time. Keep pressing them until the
	display screen appears.

3. Press the CONTRAST ( ) button.

Initialization starts.

*The <SET-UP MENU> RESET screen disappears automatically after finishing initialization.

CONTRAST

Note:

●To cancel initialization.

Press the VOLUME/SELECT [+] or [–] buttons.

*The <SET-UP MENU> RESET screen disappears after cancelling initialization.

Initial settings

Sorts	Functions (Items)	Initialization
		(setting)
screen	SHARPNESS	00
<MENU>
	COLOR SYSTEM	AUTO
screen	WHITE BALANCE	00
MENU>	H. POSITION
	B. CUT OFF	00
	R. CUT OFF	00
	G. CUT OFF	00
UP-	R. DRIVE	00
<SET	B. DRIVE	00
	CONTROL LOCK	OFF
adjustment	PHASE	00
	CHROMA	00
Picture	CONTRAST	00
	BRIGHT	00
Volume	VOLUME	20

10