JVC MP-XV841US manual 28EN, PD-TS decoder, Exit

28EN JVC ORIGINAL SOFTWARE AND SYSTEM APPLICATIONS

•Exit

Quits the CC converter. The CC converter status you have set at this point is held. If you wish to restart the CC converter, you can start up the program from the Start menu.

*To change the CC converter setting and save the new status, you must click [Exit]. To restart the CC converter, click [Start] [[All Programs] [[CC Converter] [[CC Converter].

Tips

•Do not change the sound playback device when you are playing back the sound data (such as an audio file).

•If you have changed the sound playback device, wait five (5) or more seconds before playing back the data.

•The CC converter can process two-channel PCM data only. There are cases where the DVD sound is to be output to an external sound source or where multi-channel data or data in a non-PCM format is to be sent by a sound device: in these cases, the CC converter cannot process the data.

•If you play back data having a high noise level, the noise may be emphasized.

•Users other than the computer administrator (even if they have the Administrator’s authority) may not change the CC converter setup.

PD-TS decoder

This decoder is designed to capture, using a separate personal computer (Pentium 4, 2 GHz or faster recommended), the data which has been shot in the GR-PD1 HI-RES. mode or PS50 mode and play the data using the Windows Media Player 9 of this unit (MP-XV841GB) in a simplified format, and it is pre-installed.

•To uninstall the decoder, select [Add/Remove Programs] and delete it.

•The installer is included on the application CD-ROM so use the provided CD-ROM if you need to re-install the decoder.