Onkyo HT-S780 instruction manual Controlling Other Components, Resetting the Remote Mode Buttons

Page 53

Controlling Other Components—Continued

Remote Control Codes for Onkyo Components Connected via

Onkyo components that are connected via can be controlled by pointing the remote controller at the AV receiver. This means that you can control such compo- nents even if they are out of sight, for example, installed in a rack.

1Make sure the Onkyo component is con-

nected with an cable and an analog audio cable (RCA).

See page 31 for details.

2Enter the appropriate remote control code for the [DVD] or [CD] REMOTE MODE but- ton.

[DVD] REMOTE MODE button 1612: DVD player with [CD] REMOTE MODE button

1327: CD player with

1808: MD recorder with

1322: CD recorder with

See the previous page for information on entering remote control codes.

3Press the [DVD] or [CD] REMOTE MODE button, point the remote controller at the AV receiver, and operate the component.

If you want to control an Onkyo component by pointing the remote controller directly at it, or you want to control

an Onkyo component that’s not connected via , enter the following remote control codes:

[DVD] REMOTE MODE button

0627: DVD player without (default) [CD/MD/CDR] REMOTE MODE button

1817: CD player without (default)

0868: MD recorder without

1323: CD recorder without

Note:

If you connect an -compatible Onkyo MiniDisc or CD recorder to the TAPE IN/OUT jacks, for remote operation to work properly, you must set the display to MD or CDR (see page 33).

Resetting the REMOTE MODE Buttons

If you’ve previously entered a code for a REMOTE MODE button but now want to reset it, perform the fol- lowing procedure.

1While holding down the REMOTE MODE button that you want to

reset, press the [L NIGHT] button for 3 seconds.

The REMOTE MODE button lights up.

2Press the REMOTE MODE button again.

The REMOTE MODE button is reset and flashes twice.

The [DVD] and [CD] REMOTE MODE buttons are preprogrammed with remote control codes for control- ling Onkyo components. When one of these buttons is reset, the prepro- grammed code is restored.

Resetting the Remote Controller

You can reset the remote controller to its default settings.

1While holding down the

[RECEIVER] button, press the [L NIGHT] button for 3 seconds.

The [RECEIVER] button lights up.

2Press the [RECEIVER] button

again.

The remote controller is reset and the [RECEIVER] button flashes twice.

53

Image 53
Contents HT-S780 Avis Important Safety InstructionsPower PrecautionsPrecautions Speaker PrecautionsPlacement Using Close to a TV or ComputerSpeaker cable for center speaker 10 ft m Supplied AccessoriesSpeaker cable for front speakers 15 ft .5 m Features Table of Contents Front Panel Front & Rear PanelsDisplay Front & Rear PanelsDigital in Optical 1, 2, 3 & Coaxial Tape IN/OUT Rear PanelPower switch Not North American model Front Rear STANDBY/ON indicatorSubwoofer SKW-530 Output Level controlReceiver Mode Remote ControllerHow to Use the Remote Controller Remote Controller DVD Mode Remaining time, total time, and so on CD/MD/CDR ModeTV Control Buttons Tape ModeUsing the Remote Controller Before Using the AV receiverInstalling the Batteries Enjoying Home Theater Connecting SpeakersSpeaker Connection Precautions Connecting SpeakersConnecting Speaker Set a Connecting Speaker Set B sold separatelyConnecting the Indoor FM Antenna Connecting AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shown American ModelConnecting an Outdoor FM Antenna Connecting AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterAbout AV Connections Connecting Your ComponentsOptical Digital Jacks AV Connection Color CodingConnecting Both Audio & Video Connecting Your ComponentsWhich Connections Should I Use? Video Connection FormatsVideo Connection Connecting a TV or ProjectorAudio Connection TV, projector PBetcConnect one or the other Connecting a DVD playerVCR Connecting a VCR or DVD Recorder for PlaybackDVD recorder Or the otherConnecting a Camcorder, Games Console, or Other Device Connecting a VCR or DVD Recorder for RecordingVideo 3 Input Video 3 Input L/RVideo source Connection HT-R530CD Player, or Turntable with Built-in Phono Preamp Step Connecting a CD Player or TurntableTurntable MM with built-in phono preamp Phono Preamp MC head amp or MC transformerConnecting the Power Cord of Another Component Connecting a Cassette, CDR, MiniDisc, or DAT RecorderConnect one Cassette recorder, CDR, etcConnecting the Power Cord Connecting Onkyo ComponentsAuto Power On/Standby Direct ChangeTurning On the AV Receiver Turning OnSmooth Operation in a Few Easy Steps Have you connected a component to a digital audio input?Changing the TAPE/MD/CDR Display First Time SetupAssigning Digital Inputs to Input Sources Playing Your AV Components Select a suitable listening mode and enjoyBasic AV Receiver Operation Start playback on the source componentDisplaying Source Information Using the Multichannel InputPlaying Your AV Components Tuning into Radio Stations Using the TunerAM Frequency Step Setup not North American model Listening to the RadioPresetting Radio Stations Using the TunerSelecting Preset Stations Deleting PresetsAdjusting the Bass & Treble Setting the Display BrightnessUsing the OptiResponse Equalizer Common FunctionsUsing Headphones Using the Sleep TimerAdjusting Speaker Levels Common FunctionsPure Audio Stereo Listening Mode Using the Listening ModesSelecting Listening Modes SurroundPCM*1 Using the Listening ModesDTS About the Listening ModesOnkyo Original DSP Modes Using the Late Night Function Dolby Digital only Adjusting the Listening ModesUsing the CinemaFILTER Using the Audio Adjust FunctionsInput Channel Settings Adjusting the Listening ModesPL II & PL IIx Music Mode Settings DTS Neo6 Music Mode SettingAdvanced Speaker Settings Advanced SetupSpeaker Distance Use the Down Button toSpeaker Levels Advanced SetupSpeaker Configuration Double Bass Crossover FrequencyLeft and Right / but- tons to select 2ch or 1ch Use the Left and Right / buttons to selectDigital Input Digital Input Signal FormatsRecording Camcorder Video signal audio signalRecording the Input Source Recording from Different AV SourcesControlling Other Components Entering Remote Control CodesRemote Mode Resetting the Remote Mode Buttons Remote Control Codes for Onkyo Components Connected viaResetting the Remote Controller Controlling Other ComponentsPress SAT first CH +Press VCR first Troubleshooting Troubleshooting Sound changes when I connect my head- phones? Remote controller doesn’t work?Can’t control other components? Can’t record?AV Receiver HT-R530 SpecificationSpeaker SpecificationOnkyo Europe Electronics GmbH Onkyo U.S.A. CorporationOnkyo Europe UK Office Onkyo China LimitedPage Page Page Page Page Page Page Page Page Page Page Page Page

HT-S780 specifications

The Onkyo HT-S780 is a home theater system designed to deliver an immersive audio-visual experience for movie enthusiasts and music lovers alike. This all-in-one system combines the latest technologies with user-friendly features, making it an ideal choice for both newcomers and experienced users in the world of home entertainment.

One of the standout features of the HT-S780 is its 5.1-channel surround sound setup. With five speakers and a powerful subwoofer, this system creates a dynamic audio landscape that draws users into the action of their favorite films and TV shows. The system is equipped with Onkyo’s proprietary technologies, including Dolby Atmos and DTS:X, which provide an enhanced three-dimensional sound environment. This means that sounds can be perceived from all directions, adding remarkable depth and realism to the viewing experience.

The receiver at the heart of the HT-S780 boasts an array of connectivity options. It features multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices. With HDMI ARC support, the system is also capable of transmitting audio back to the receiver from compatible smart TVs using a single HDMI cable. This simplifies setup and reduces cable clutter.

In addition to HDMI connectivity, the HT-S780 is equipped with Bluetooth technology, enabling wireless audio streaming from smartphones, tablets, and computers. This feature allows users to enjoy their favorite music without the need for physical connections, making it convenient for streaming services and personal music collections.

Another notable characteristic of the HT-S780 is its room calibration feature, which utilizes AccuEQ technology. This system analyzes the acoustics of the room and optimizes speaker performance to ensure balanced audio regardless of the room's layout. This ensures that the listener experiences consistent sound quality throughout the space.

The design of the Onkyo HT-S780 is both stylish and functional. The compact speakers can easily blend into various home decor styles, while the receiver’s intuitive interface allows for easy navigation and setup. The included remote control offers added convenience, enabling users to adjust settings and switch inputs effortlessly.

Overall, the Onkyo HT-S780 stands out as a comprehensive home theater solution that combines advanced audio technologies with user-friendly features. Its combination of surround sound, versatile connectivity, and room calibration makes it a solid choice for anyone looking to elevate their home entertainment experience.