OPERATION
Zoom
•When the ZOOM button “TEL” is pressed, the image on the monitor screen will become gradually bigger; when the ZOOM button “WIDE” is pressed the image will become gradually smaller.
•Every time the ZOOM button is pressed, focusing will be automatically
•When the ZOOM button is continually pressed, the zoom speed will increase after a while.
INPUT SELECT |
| FOCUS |
|
| ZOOM |
| NEAR | FAR |
|
|
|
CAMERA VIDEO | MANUAL | AUTO | TELE | WIDE | |
Front Control Panel
ENGLISH
Focusing
AUTO FOCUSING
•When the AUTO button is pressed, focusing on the subject will be carried out automatically.
•Once auto focusing is completed, this particular function will be suspended and the focusing on the subject will re- main constant.(The indicator lamp will blink while the auto focusing is in operation; once completed the lamp will re- main lit for one second and then go out.)
Note:
INPUT SELECT |
| FOCUS |
| NEAR | FAR |
CAMERA VIDEO | MANUAL | |
Front Control Panel
ZOOM
AUTO | TELE | WIDE |
•Auto focusing may not work on the following subjects. If so, use manual focusing instead.
•Subjects with minimal contrasts or shiny surfaces.
•Subjects with detailed and repetitive patterns such as horizontal stripes, checked patterns, etc.
•
•The subject is not centred on the screen.
•The screen is dark.
•AUTO FOCUS will not operate while ‘ON SCREEN ADJUSTMENT’ is selected.
MANUAL FOCUSING
•When you wish to focus on a particular part of a three- dimensional object, adjust focusing by pressing the MANUAL FOCUS button.
•When the NEAR button of manual focusing is selected, fo- cus will be on the higher part of the
INPUT SELECT |
| FOCUS |
| NEAR | FAR |
CAMERA VIDEO | MANUAL | |
Front Control Panel
ZOOM
AUTO | TELE | WIDE |
Input Select
•The INPUT SELECT button can change the signals of the main unit’s CAMERA IMAGE SIGNAL terminal and VIDEO
INPUT terminal, and send them to the VIDEO OUTPUT | INPUT SELECT | FOCUS |
| ZOOM |
terminal. Once selected, the indicator lamp will light up. |
| NEAR FAR |
|
|
|
|
|
| |
• When CAMERA is selected, image signals from the unit’s |
| MANUAL | AUTO | TELE WIDE |
camera will be used. | CAMERA VIDEO | |||
|
|
|
|
•When VIDEO is selected, signals from the VIDEO INPUT
terminal will be sent to the VIDEO OUTPUT terminal. | Front Control Panel |
Note: |
|
| ||
|
|
| ||
• Image signals from the VIDEO INPUT terminal can- | CAMERA | CAMERA |
| |
not be sent to the CAMERA OUTPUT terminal. | INPUT SELECT |
| ||
video signal | OUT | |||
| ||||
|
| VIDEO |
| |
|
| Composite |
| |
|
| signal |
| |
|
| VIDEO | IN | |
|
| Composite signal |
|
9