Settings menu

Audio: allows adjustments to Volume of the internal speaker and allows a chime to play when starting the projector.

Adjustments can also be made from the projector’s keypad and the remote.

Sources: determines which source the projector checks first for active video during power-up. When Autosource is selected, the Source Enable feature indicates which sources the projector attempts to lock onto. You can use the Source Enable feature to eliminate certain sources from this search, which will speed the search. The source options are Computer for a computer, progressive DVD, or HDTV source, Video 1 for S-video connections, Video 2 for

component video connections and Video 3 for composite video sources. By default, the check boxes for all sources are checked. Uncheck a source box to eliminate it from the search. When Autosource is not checked, the projector defaults to the source selected in Sources. To display another source, you must

manually select one by pressing the Computer or Video button on the remote or keypad.

System>Rear: reverses the image so you can project from behind

a translucent screen. Ceiling: turns the image upside down for

ceiling-mounted projection. Low Power: toggles between on and Off. Turn it on to lower the light output of the lamp. This also lowers the fan speed, making the projector quieter. Display Messages: displays status messages (such as “Searching” or “Mute”) in the lower-left corner of the screen. Screen Saver Off: prevents the screensaver on your computer from being activated if the USB portion of the M1 is plugged into the computer. This function was previously called NND. Power Save: automatically turns the lamp off after no signals are detected for 20 minutes. After 10 additional minutes with no signal, the projector

powers down. If an active signal is received before the projector

powers down, the image will be displayed. After an additional 10 minutes with no signal, the projector powers down and can be toggled off. If an active signal is received before the projector powers down, the image will be

displayed.

Startup Logo: allows you to display a blank screen instead of the

Default screen at startup, and when no source is detected.

Blank Screen: determines what color is displayed when you press the Blank button on the remote.

Language: allows you to select a language for the onscreen display.