Knoll Systems HDP404 Advanced menu, Horizontal/Vertical Position adjusts the position of a

Page 19

19

Gamma: Gamma tables contain preset intensity configurations optimized for the input source.

You can select a gamma table that has been Gamma specifically tuned for either film, CRT

(Cathode Ray Tube), Video, PC, or Bright Room input. (Film input is material originally captured on a film camera, like a movie; video input is material originally captured on a video camera, like a TV show or sporting event.)

White Peaking increases the brightness of whites that are near 100 percent.

NOTE: Your viewing preferences may vary. Cycle through the gamma options and pick the one you like the best.

Overscan: Removes noise from around the edges of the video image. Select zoom to remove the outer 3% of the image and scale the image back to its original size. Select crop to remove the outer 3% of the image without rescaling.

Advanced menu

Advanced menu

Remember that not all options in the menus are

 

available for all sources/ signals.

 

Iris: Iris adjusts the aperture of the Iris from 0 to 100

 

(fully open) to regulate the amount of light emitting from

 

the projector. Close the aperture to increase the contrast

 

in dark images.

 

Phase: adjusts the horizontal phase of a computer

 

source.

 

Tracking: adjusts the vertical scan of a computer

 

source.

 

Horizontal/Vertical Position: adjusts the position of a

 

computer source.

 

Sync Threshold Adjust: (progressive signals only).

 

If a hardware device, such as a DVD player, is not

 

syncing properly with the projector, adjust this

 

option to help it to sync when connected to the projector.

 

Flesh Tone Correction: this modifies colors to make

 

the skin complexion better.

Sharpness

Film Mode: controls de-interlacing and is On by default.

 

When checked, it assumes the incoming signal is film

 

material and optimizes the image accordingly.

 

Sharpness: (video sources only) changes the clarity

 

of the edges of a video image. Select a sharpness setting.

 

Page 18 Page 20
Image 19
Page 18 Page 20
Contents HDP404 Trademarks Safety CertificationsFCC Warning Declaration of ConformityTable of Contents Introduction Rear Connector Panel Product specificationsVolt DC output Setting up the ProjectorAnamorphic Lens Projector PositioningChoosing the aspect ratio Video ConnectorsComposite RCA video connection Connecting a video deviceDigital connections Displaying an imageShutting down the projector Power Save Adjusting the imageTroubleshooting your setup Sleep TimerTurning off the projector Page Page Still need assistance? Optimizing video images Using the remote controlTroubleshooting the remote Using the keypad buttonsCustomizing the projector Using the menusPicture Menu SettingsService menuAdvanced menu Horizontal/Vertical Position adjusts the position of aSettings menu Page Select Replacing the projection lamp Maintenance Cleaning the lensWait 60 minutes to allow the projector to Cool thoroughly Remote control discrete codes Communication configuration RS-232 terminal specificationsSupported video formats Function Command Response RS232 Command FormatFunction Command Range Default Supported commands= CRT Supported Commands Limited Warranty

HDP404 specifications

Knoll Systems HDP404 is an advanced high-definition multimedia distribution system that brings unparalleled quality and convenience to AV installations in both commercial and residential settings. This innovative device is engineered to handle a range of audio and video signals, delivering seamless performance for various applications, including home theaters, conference rooms, and educational institutions.

One of the main features of the HDP404 is its ability to support 4K Ultra HD resolution, providing crystal-clear images and vibrant colors. This is complemented by its capacity to manage multiple input sources, making it suitable for setups with multiple devices such as gaming consoles, Blu-ray players, and streaming devices. The system is designed to provide smooth switching between these sources without any latency, ensuring a delightful user experience for viewers.

The HDP404 incorporates advanced scaling technology, which automatically adjusts the resolution of the output display to match the capabilities of the connected devices. This dynamic scaling feature minimizes compatibility issues and allows for optimal image quality across a variety of screens and resolutions. Additionally, this technology enhances the flexibility of the installation, enabling users to change connection setups without compromising on quality.

Another notable characteristic of the Knoll Systems HDP404 is its robust signal distribution capability. The device features an HDMI output that supports long-distance transmission using CAT6 cabling, allowing for greater distance between the source and the display without loss of quality. This makes it ideal for large venues where equipment might be spread out over a significant area.

The HDP404 is also equipped with user-friendly interfaces, simplifying the process of configuration and operation. An intuitive remote control and web interface allow users to adjust settings easily, modify source configurations, and manage connected devices from a distance. Furthermore, the unit supports both TCP/IP and RS-232 control, making it compatible with a wide range of automation systems for smart homes and commercial applications.

In summary, the Knoll Systems HDP404 stands out as a versatile and powerful multimedia distribution solution. With its support for 4K Ultra HD, advanced scaling technology, robust signal distribution, and user-friendly controls, it meets the demands of modern AV installations, delivering exceptional performance and quality in any environment.
Top Page Image Contents