Bosch Appliances PSU-124-DC050 Installation, Tools required, Opening the side covers

2Installation

CAUTION!

Installation should only be performed by qualified service personnel in accordance with the National Electrical Code or applicable local codes.

Disconnect the supply power before installing

2.1Tools required

–Small flat blade screwdriver.

–Crosshead screwdriver.

–Wire cutter/stripper tool.

2.2Opening the side covers

Figure 2.1 Removing side covers

Unscrew the four cross-head screws at each corner and remove each of the side covers.

2.3Mount the unit

Figure 2.2 Mounting the unit

Secure the unit to a flat surface using mounting screws (not supplied) in the four holes (4 mm) shown in the figure.