Bosch Appliances UML-100-90, UML-102-90, UML-080-90 Navigating the Monitor On-screen Display OSD

Small Size LCD/LED Monitors Navigating the Monitor en 29

6.2Navigating the Monitor On-screen Display (OSD)

The UML-080-90, UML-100-90, UML-082-90 and the UML-102- 90 have two (2) modes: Video and PC. The LCD is programmed through the on-screen display (OSD) menus and submenus where an operator can select operating parameters. To access the OSD menus, press the Menu button on the front panel. Use the front panel of the monitor to make any necessary adjustments to the OSD.

NOTICE!

When you are navigating through the OSD menus, use the Input button to select a menu and use the Menu button to exit a menu.

To navigate the set up menus, follow the steps below:

1.Connect the CVBS, S-Video or the VGA cable.

2.Press the Power button to turn on the unit (see Figure 6.1).

3.If required, press the Input button and the and buttons until a signal is displayed.

4.Press the Menu button to activate the main menu selections (see Figure 6.1).

5.Press the and buttons to select a menu.

6.Press the Input button to enter the selected menu.

7.Press the and buttons to select a sub-menu item.

8.Press the Input button to enter the selected sub-menu.

9.Press the and buttons to toggle the OSD values.

10.Press the Menu button to exit the selected menu and to return to the menu bar or to confirm a selection.

11.Press the Menu button again to exit the OSD menu bar.

Bosch Security Systems, Inc. User Manual F.01U.134.499 1.0 2009.07