D9210B
Operation
4.0Operation
4.1Door Release Application
The D9210B can be used for door release functions. When used in this configuration, the strike relay contacts must be supervised. This can be accomplished with the use of an
Program Point Index in the POINTS handler as Supervisory with Point Response as [A] Supervisory on Open and Trouble on Short.
The power supply,
RELAY
AUX POWER
UL Listed for Fire
POPIT |
DOOR A |
(+) |
MAGNETIC |
DOOR HOLDER |
D9210B |
1 |
PWR + |
2 |
LCKN/C |
3 |
LCKCOM |
4 |
LCKN/O |
5 |
COM |
6 |
SDIA |
7 |
SDIB |
8 |
T + |
9 |
ZNCOM |
10 |
ZN + |
11 |
RTE |
12 |
COM |
Figure 6: D9210B Door Release Application Connections
Note: When using the D9210BC, you must use the D8004 Transformer Enclosure for the power supply transformer.
D9210B Operation and Installation Guide
© 2002 Bosch Security Systems | Page 23 | 32206G |