Zenith LS2400 Maintenance Plan, Approved Service Organization, Date of First Shipment, Training

Operating System Specific Solutions

NOS specific information is key installation information for those NOS’s covered in the Configuration Guide.

Utilities

·Express Builder Version 2.1 Setup and Configuration

ÞSYM53C876 DRIVERS

ÞExpress5800 LS2400 UTILITIES, SSU

ÞOn Line service Manual, user’s Guide

ÞAMI configuration Utilities,

·ESMPro Management Suite Version 1.4

Bios

·Express5800 LS2400 Flash PHENIX BIOS (see latest version on WEB)

·User & supervisor passwords supported

·DMI 2.0 capable

MAINTENANCE PLAN:

Under limited warranty, maintenance is performed to the major module assembly level. After warranty, approved ZDS service organizations can perform maintenance as required. The Field Replaceable Units (FRU) section of this PMRB lists the major assemblies.

APPROVED SERVICE ORGANIZATION:

Commercial Sales	:	Approved ZDS Service Centers and Field Engineers.
Contract Sales	:	Refer to applicable contract.

Zenith Data Systems reserves the sole right to determine, direct, and conduct any and all factory-authorized reworks or upgrades, including the choice of service providers, based on quality and cost of provider.

DATE OF FIRST SHIPMENT:

July 1998

TRAINING:

For service training in Europe, contact the Zenith Data Systems or Bull subsidiaries in each country. A list of subsidiaries and phone numbers may be obtained by

calling ZDS in France at + (33) 1 5523 7200

EXPRESS 5800 LS2400 Page 6/11