Dynamic Warnings and Restrictions

It is important to operate this EVM within the input voltage range of 0 V to 5.5 V.

Exceeding the specified input range may cause unexpected operation and/or irreversible damage to the EVM. If there are questions concerning the input range, please contact a TI field representative prior to connecting the input power.

Applying loads outside of the specified output range may result in unintended operation and/or possible permanent damage to the EVM. Please consult the EVM User’s Guide prior to connecting any load to the EVM output. If there is uncertainty as to the load specification, please contact a TI field representative.

During normal operation, some circuit components may have case temperatures greater than 50° C. The EVM is designed to operate properly with certain components above 50° C as long as the input and output ranges are maintained. These components include but are not limited to linear regulators, switching transistors, pass transistors, and current sense resistors. These types of devices can be identified using the EVM schematic located in the EVM User’s Guide. When placing measurement probes near these devices during operation, please be aware that these devices may be very warm to the touch.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

TPS40003 specifications

The Texas Instruments TPS40003 is a versatile, high-performance synchronous buck controller designed to efficiently regulate output voltage in a range of applications. This device is particularly suited for power supply designs where space and efficiency are critical, such as telecommunications, industrial automation, and consumer electronics.

One of the standout features of the TPS40003 is its ability to operate over a wide input voltage range of 4.5V to 36V. This flexibility allows it to be effectively utilized in various scenarios, accommodating different power supply systems and ensuring compatibility with existing infrastructure. Furthermore, the output voltage can be adjusted down to as low as 0.8V, making it suitable for powering low-voltage microcontrollers and FPGAs.

The TPS40003 incorporates advanced voltage mode control, which enhances transient response and stability. This control method allows for quick adjustments in duty cycle in response to load changes, ensuring a steady output voltage even under varying loads. Coupled with a programmable soft-start feature, the controller minimizes inrush current during startup, protecting sensitive downstream components.

Another significant advantage of the TPS40003 is its integration of a high-side and low-side MOSFET driver. This synchronous operation significantly improves power efficiency by reducing conduction losses. The device operates with a high switching frequency, typically around 200 kHz, allowing for the use of smaller passive components and ultimately leading to a more compact design.

Thermal performance is another essential characteristic of the TPS40003. With built-in thermal shutdown and overcurrent protection features, it promotes reliable operation under various thermal conditions, enhancing the overall robustness of the power supply design. Additionally, the device's wide range of compensation options allows designers to fine-tune performance according to specific application requirements.

In terms of packaging, the TPS40003 is offered in a compact, thermally enhanced HTQFN package, which helps in conserving PCB space while maintaining efficient heat dissipation.

Overall, the Texas Instruments TPS40003 controller stands out as a robust, feature-rich solution for DC-DC conversion applications. With its wide operating voltage range, synchronous operation, and protective features, it provides designers with a reliable, efficient means of managing power in today's demanding electronic systems.