Using the remote controller
MODE CD
CD operation buttons
Numeric keys
POWER
ON/STNBY
MODE DVD
DVD SET
MENU
DVD operation buttons
Numeric keys,
ENT button
First connect an Onkyo CD player using the zconnection. (See page 7.)
1. | Press the MODE CD button. | |
2. | Press the desired CD operation button. | |
| TRACK | : Selecting a track |
| DISC | : Selecting a disk in the CD changer |
|
| : Down |
You may also use the following buttons:
VOL ∆/∇ : Adjusting the volume level of the
MUTING : Muting the sound from the
Controlling an Onkyo DVD player
Note:
Make sure that you point the transmission part on the remote con- troller toward the sensor area on the DVD player.
1.Press the MODE DVD button.
2.Press the desired DVD operation button.
POWER ON/STNBY
:Turning the power on and off to the DVD player
DVD SET | : DVD setup |
DVD player | |
MENU | : Displaying the menu |
| : Moving the cursor |
ENTER | : Confirming the selection |
RETURN | : Return |
DVD player buttons | |
| : Down |
| : Up |
| : Playback |
| : Stop |
| : Rewind |
| : Fast forward |
| : Pause |
EJECT r | : Eject |
0, 1~9, +10 | : Numeric keys |
ENT | : Confirm |
You may also use the following buttons: | |
VOL ∆/∇ | : Adjusting the volume level of the |
MUTING | |
: Muting the sound from the | |
|
Note:
The ENT button on the right below the numeric keys has the same function as “ENTER” of the ENTER/cursor button.
50