Univex 2217V Setup the stand and base, Please setup or remove the base following below steps

Setup the stand and base

Please setup or remove the base following below steps.

Adjusting Viewing Angle

∙For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s preference.

∙Hold the stand so you do not topple the monitor when you change the monitor’s angle.

∙You are able to adjust the monitor’s angle from -5￿to 20 ￿.

NOTE:

Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

Attaching the Cables