Technicolor - Thomson 545/570 manual Wireless Connectivity

Page 43

4 Wireless Connectivity

4 Wireless Connectivity

Introduction The SpeedTouch™570 and SpeedTouch™545 (with wireless upgrade card installed) feature a Wireless LAN Access Point (AP) which behaves as a hub and allows wireless connectivity between several devices and the local (W)LAN and - via the SpeedTouch™ DSL router - to the public network, e.g. the Internet.

IEEE802.1b Wireless technology enables these devices to communicate with each other in a locally mobile fashion, without the need for a wired environment.

Wireless basics The WLAN's 'radio' link is a shared medium. As no physical connection exists between the SpeedTouch™ and wireless clients, a name must be given to allow unique identifica- tion of your WLAN radio link. This is done by the Service Set ID (SSID), also referred to as Network Name. Wireless clients must be part of this SSID environment in order to be able to communicate with other clients on the (W)LAN - including the Speed- Touch™.

The IEEE802.11b standard for WLANs allows several WLAN networks using different radio channels to be co-located. Via the Direct Sequence Spread Spectrum (DSSS) system, several channels are available for use which are associated to a slightly different frequency in the allowed range. The SpeedTouch™ supports multiple radio channels and is able to select the best radio channel at each start-up.

The SpeedTouch™ supports all channels allowed for wireless networking according to the US, Asia and most of Europe’s regulations.

However, depending on local regulations, the number of channels actually allowed to be used may be restricted.

To determine your regulatory domain check:

•The label on the bottom of the SpeedTouch™ in case you purchased a Speed- Touch™570.

•The label on the SpeedTouch™010 wireless upgrade card in case you purchased a SpeedTouch™545.

If you reside in:

•The ETSI regulatory domain (EC logo) the supported radio channels are channels 1 to 13.

•The FCC regulatory domain (FCC logo) the supported radio channels are chan- nels 1 to 11.

Wireless security Since the SpeedTouch™ wireless environment is a radio environment, precautions must be taken to ensure that your wireless network is safe from malicious intruders. In addi- tion to providing the possibility of giving a personalized Network Name (SSID) to the wireless network, the SpeedTouch™ features a physical registration mechanism, a managed Access Control List (ACL) and enhanced 64- or 128-bits Wired Equivalent Privacy (WEP) encryption to secure your network and to control wireless client access.

E-DOC-CTC-20030814-0001 v1.0

41

 

Page 42 Page 44
Image 43
Page 42 Page 44
Contents SpeedTouch Page SpeedTouch 545/570 Status Change Note PeckelbeenS Short Title Setup and Users Guide ST545/570 R4.2.1 enContents SpeedTouch Napt Manager Support SpeedTouch Installation Getting Acquainted with the SpeedTouch Indicator Description Name Color StatePower Socket Registration button Indicator Description Name LED Status Setting Up the SpeedTouch SpeedTouch Turn onSee Front panel LEDs on page 6 for more information SpeedTouch Configuration Setup SpeedTouch Setup wizard Microsoft Windows SpeedTouch Configuration SetupSupported MS Windows OSs Detection of the SpeedTouch Click Initial SetupDOC-CTC-20030814-0001 DOC-CTC-20030814-0001 SpeedTouch and PC ConfigurationClick Finish to close the wizard Follow the instructions Select Change the LAN configurationOperating System Independent SpeedTouch Configuration Setup Advanced Easy Setup SpeedTouch Installation DOC-CTC-20030814-0001 SpeedTouch Internet Connectivity Easy Setup Network Connections Network Connections window appears Starting an Internet sessionTerminating an Internet session Click Settings Control Panel on the Start menuConnection icon in your PC’s Network Connections window See 3 Dr SpeedTouch onIntroduction Starting an Internet session Using the SpeedTouch Web PagesClick Disconnect Introduction BroadBand dial-in clients Connect to the Internet via a Host PPPoE Dial- in ClientConfiguring a broadband connection Using an MS Windows XP BroadBand ConnectionNext window, select Set up my connection manually SpeedTouch Internet Connectivity Starting a broadband Internet session Terminating a broadband Internet session Click Apply Now Using the Mac OS X PPPoE Dial-in ClientClick Disconnect SpeedTouch Internet Connectivity Dr SpeedTouch Dr SpeedTouch features DOC-CTC-20030814-0001 Dr SpeedTouch Wireless Connectivity Wireless Connectivity Preparing the first-time wireless client First-time Wireless Client AssociationFirst-time wireless client configuration Connecting Wireless Clients DOC-CTC-20030814-0001 SpeedTouch Web Interface System Log WirelessBasic topic menu Click System Information ConnectionsIP Routing Advanced topic menu Click DiagnosticsSystem Password IP AddressesBasic Topics Menu Links DOC-CTC-20030814-0001 Multicast from DSL to Wlan DOC-CTC-20030814-0001 DOC-CTC-20030814-0001 DOC-CTC-20030814-0001 Advanced Topics Menu Links DOC-CTC-20030814-0001 DOC-CTC-20030814-0001 DOC-CTC-20030814-0001 Secure FullOff No Dhcp Auto Dhcp Dhcp serverNo Dhcp DOC-CTC-20030814-0001 DOC-CTC-20030814-0001 SpeedTouch Web Interface Easy Setup wizard Supported Operating Using SpeedTouch Napt Manager Detection of the SpeedTouchDetection of the SpeedTouch Configuration of the SpeedTouch SpeedTouch Napt ManagerClick Configure Napt Settings Click ConfigurationDOC-CTC-20030814-0001 Configuration of the SpeedTouch DOC-CTC-20030814-0001 DOC-CTC-20030814-0001 Support Introduction Installing the wireless upgrade card Upgrading a SpeedTouch545 for Wireless NetworkingDOC-CTC-20030814-0001 Wall mounting assembly Using the Wall Mounting AssemblyAssembly Preparing and usingIntroduction System software updates all OSs SpeedTouch System Software UpgradeIntroduction Checking for new system software Click Diagnostics & MaintenanceClick Check for new System Software Checking for new System Software Upgrade via the SpeedTouch Upgrade Wizard Click Upgrade My SpeedTouch DOC-CTC-20030814-0001 DOC-CTC-20030814-0001 DOC-CTC-20030814-0001 Upgrade via the SpeedTouch Web Pages DOC-CTC-20030814-0001 Reset to default configuration SpeedTouch Default ConfigurationSelect Universal Plug and Play and click OK UPnP on Windows XP SystemsSupport Problem Solution TroubleshootingTouch545 for Wireless Networking WEP Isdn variant Support Page Built for excellence

545/570 specifications

The Technicolor Thomson 545/570 series represents a significant milestone in the evolution of television broadcasting technology. Launched in the early 2000s, these models were designed to meet the increasing demands of both broadcast and post-production environments, making them invaluable tools for industry professionals.

One of the standout features of the Thomson 545/570 series is its advanced digital signal processing capabilities. This technology enabled seamless integration of various video and audio formats, allowing for high-quality signal transmission and reception. The ability to handle multiple formats catered to a wide range of production needs, ensuring compatibility with existing workflows and equipment.

Another key characteristic of the Technicolor Thomson 545/570 is its robust video processing engine. This engine supports a variety of resolutions, making it adaptable for both SD and HD content. Users could enjoy enhanced picture quality due to advanced algorithms designed to reduce noise and improve image clarity. This capability was especially beneficial for live broadcasts and critical viewing applications where quality was paramount.

The series also featured a user-friendly interface that facilitated easy navigation and operation. Its intuitive design allowed operators to quickly access essential functions, streamlining the workflow in fast-paced environments. This ease of use was complemented by customizable options, enabling professionals to configure the systems according to their specific project requirements.

In terms of connectivity, the Technicolor Thomson 545/570 provided a plethora of input and output options, including SDI, HDMI, and analog outputs. This versatility allowed for easy integration with a broad range of peripherals, from cameras to external storage devices, enhancing the overall production capabilities.

Moreover, the build quality of the Thomson 545/570 series was commendable. The robust chassis and components ensured durability, while the modular design offered flexibility for upgrades and maintenance. This focus on longevity and adaptability made the series a preferred choice for many broadcasting houses and production studios.

In conclusion, the Technicolor Thomson 545/570 series delivered a blend of cutting-edge technology and user-centric design. Its advanced processing capabilities, versatile connectivity options, and reliability positioned it as a cornerstone in modern broadcasting, contributing significantly to the quality of television content during its time. For professionals in the industry, the 545/570 series remains a noteworthy example of technological innovation and excellence in broadcast engineering.
Top Page Image Contents