Adjusting the Projector Function (“PRJ-ADJ” Menu) (Continued)
■Setting the Input Terminal Names (Input
Name)
Set the name of the input terminal (up to 14 alphanu- merical characters).
1
Press P/R to select “Input Name” and then press ENTER.
Picture |
| ||||
| Input name | HDMI1 |
|
|
|
|
|
|
|
|
|
| H D M I 1 |
|
|
|
|
| Reset |
|
|
|
|
| Return |
|
|
|
|
\ or button | Selects a character column. |
|
|
▼ or 、 button | Selects a character. |
|
|
ENTER button | Sets the input terminal name. |
|
|
2
Press P/R to select “Return” and then press ENTER to return to the previous screen.
•To return to the previous setting, select “Reset” and then press ENTER.
Note
•When connecting the projector to a Sharp Video Product with an HDMI cable using an input mode of HDMI1 or HDMI2 and the linked func- tion with HDMI CEC (“One Touch Play” or “Sys- tem Standby”) works normally, the name of the connected Sharp Video Product is automatically captured.
•When the input terminal name has been changed by a user, the changed name is displayed.
•To return to the default name, select “Reset” and press ENTER.
4Setting the Demo Mode
Set the Demo Mode to “On” or “Off”.
Selectable items | Description |
On | This enables Demo Mode. |
Off | This disables Demo Mode. |
Menu operation ⇒ Page 34
5Selecting the Transmission
Speed (RS-232C)
Make sure that both the projector and computer are set for the same baud rate.
Selectable items | Description | |
9600bps | Transmission speed is slow. | |
38400bps |
|
|
|
| |
|
|
|
115200bps | Transmission speed is rapid. | |
6Fan Mode Setting
This function changes the fan rotation speed.
Selectable items | Description |
Normal | Suitable for normal environments. |
High | Select this when using the projector at |
| altitudes of approximately 4,900 feet |
| (1,500 meters) or more. |
•When “Fan Mode” is set to “High”, the fan rotation speeds up, and the fan noise becomes louder.
7Returning to the Default Settings
Use “All Reset” to initialize all the adjustments you have made to the default settings.
Note
The following items cannot be initialized.
•
•
•
8Lamp Timer (Life)
You can confirm the cumulative lamp usage time and the remaining lamp life (percentage).
Lamp usage condition | Remaining lamp life | ||
|
|
|
|
| “Life” | 100% | 5% |
|
|
|
|
Operated exclusively with | Approx. 3,000 | Approx. 150 | |
“Eco+Quiet” set to “On” | hours | hours | |
|
|
| |
Operated exclusively with | Approx. 2,000 | Approx. 100 | |
“Eco+Quiet” set to “Off” | hours | hours | |
Note
•It is recommended that the lamp be changed when the remaining lamp life becomes 5%.
•The lamp life may vary depending on the us- age condition.
-46