Sharp XV-Z3000 manual Regarding the Lamp, Resetting the Lamp Timer

Page 58

Regarding the Lamp (Continued)

4 Remove the lamp unit.

Handle

• Loosen the securing screws from the lamp unit. Hold the lamp unit by the handle and pull it in the direction of the arrow. At this time, keep the lamp unit horizontal and do not tilt it.

5 Insert the new lamp unit.

•Press the lamp unit firmly into the lamp unit compartment. Fasten the securing screws.

6 Replace the lamp unit cover.

•Align the tab on the lamp unit cover (1) and place it while pressing the tab (2) to close it. Then tighten the user service screw to secure the lamp unit cover.

Info

•If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is con- nected to the projector.

Securing screws

2

1

Resetting the Lamp Timer

Reset the lamp timer after replacing the lamp.

Info

•Make sure to reset the lamp timer only when replacing the lamp. If you reset the lamp timer and continue to use the same lamp, this may cause the lamp to become damaged or ex- plode.

1Connect the power cord.

•Plug the power cord into the AC socket of the projector.

2Reset the lamp timer.

•While simultaneously holding down UMENU, TENTER and R on the pro- jector, press SSTANDBY/ON on the pro- jector.

•“LAMP 0000H” is displayed, indicating that the lamp timer is reset.

AC socket

STANDBY/ON button

ENTER button

MENU button

R button

56

Page 57 Page 59
Image 58
Page 57 Page 59
Contents XV-Z3000 Special Note for Users in the U.K Introduction Product Disposal For Future Reference IntroductionContents Maintenance Maintenance Indicators Regarding the Lamp ReferenceAccessories CleaningPower Sources Power-Cord ProtectionSafety Check Damage Requiring ServiceReplacement Parts OverloadingAvoid locations with extremes of tem- perature Rest your eyes occasionallyDo not block the exhaust and intake vents Temperature monitor function Using the projector in other countriesOther connected equipment Accessories Optional accessoriesPart Names and Functions Power IndicatorFocus ring For adjusting the focus ProjectorPart Names and Functions Rear ViewUsing the Kensington Lock on the projector Inserting the Batteries Attach the cover and slide it until it clicks into placeUsable Range Setup and Projection Quick StartAdjust the focus, image size, and projector angle PP Standard Setup Front Projection Setting up the ProjectorSetting up the Projector Ceiling-mount SetupProjection Projection PRJ Mode174 ⋅ DistanceWhen using a wide screen 169 and projecting 169 image Setting up the ProjectorPicture Screen Size and Projection Distance When using a normal screen 43 and projecting 169 image Samples of Cables for Connection Connecting to Video Equipment Connecting to Video Equipment When connecting to equipment with Hdmi output teminal INPUT6 Computer To RGB output terminal Connecting to a ComputerTo INPUT5 terminal RGB cable commercially available Controlling the Projector by a Computer Turning the Projector On/Off Connecting the Power CordLamp indicator Power indicator STANDBY/ON button On button Turning the Projector onImage Projection Switching the Input ModeUnplug the power cord from the AC Outlet after the cooling fan stopsImage Projection Adjusting the Projected ImageAdjust lever Make small adjustments Rotate the zoom ring to enlarge or shrink the screen sizeUse the rear adjustment foot to make the projector level Correcting Trapezoidal Distortion Designating the corner Display disappearsFor correcting an image by Projected imagePress i Enter to set the posi- tion ROn-screen displayKeystone Resize Mode On the projector On the remote control Resize buttonAbout Copyrights ComputerSelecting the Picture Mode Operating with the Remote ControlSwitching the Iris Setting Shifting the Projected Im- age Vertically Image ShiftMenu Items Picture menuMenu Items Fine Sync menuPress Q or O to select the menu icon to adjust Using the Menu ScreenMenu Selections Adjustments Press dMENUPress P or R to select the item to adjust Using the Menu ScreenTo adjust the projected image while watching it Press O or Q to adjust the item selected2Adjusting the Image Picture Adjustment Picture menu1Selecting the Picture Mode Menu operation n4Adjusting the Colors Picture Adjustment Picture menu3Adjusting the Color Temperature ProgressiveSetting 6Reducing Image Noise 7Switching the Iris8Lamp Setting 3Auto Sync Auto Sync Adjustment 1Adjusting Computer Image2Special Modes Setting 4Checking the Input Signal1Adjusting the Image Position Using the Options Menu2Adjusting the Overscan You can move the projected image verticallyUsing the Options Menu 0Checking the Lamp Life Status 9Auto Power Off FunctionReversing/Inverting Projected Images 6Selecting the On-screen Display Language 4Fan Mode Setting5Returning to the Default Settings This function changes the fan rotation speedMaintenance Cleaning the projectorMaintenance Indicators Temperature warning indicator Lamp indicator Power indicatorPlease exercise care when Lamp Regarding the LampReplacing the Lamp Disconnect the power cord Removing and Installing the Lamp UnitRemove the lamp unit cover Resetting the Lamp Timer Regarding the LampConnecting Pin Assignments GNDReturn code 0DH RS-232C Specifications and Command SettingsConnecting Pin Assignments R Return code 0DHComputer Compatibility Chart Vesa HdmiTroubleshooting 23-27Black levels Specifications Product type Projector Model XV-Z3000 Video systemDimensions Index
Related manuals
Manual 67 pages 5.03 Kb

XV-Z3000 specifications

The Sharp XV-Z3000 is a high-performance DLP projector that caters to both home theater enthusiasts and professional settings. With its exceptional image quality and advanced technology, this projector has established a strong reputation since its release.

One of the standout features of the XV-Z3000 is its impressive brightness level. It boasts a brightness of up to 3000 ANSI lumens, which allows it to deliver vibrant and clear images even in well-lit environments. This makes it a great choice for presentations in conference rooms or for enjoying movies in a living room without having to blackout the entire space.

The projector utilizes DLP (Digital Light Processing) technology, known for its ability to produce sharp and crisp images. With a native resolution of 1280 x 720 pixels (HD), the XV-Z3000 can display high-definition content with stunning clarity. DLP's fast refresh rate reduces motion blur, making it ideal for watching action-packed movies or playing fast-paced video games.

Another key characteristic is its contrast ratio of 2000:1, which ensures deep blacks and brilliant whites. This enhances overall picture quality and allows viewers to appreciate the nuances in dark and bright scenes. Coupled with the projector’s color accuracy, the XV-Z3000 delivers rich and vivid colors, providing an immersive viewing experience.

The Sharp XV-Z3000 is equipped with a robust zoom lens and a flexible range of throw distances, enabling users to set up the projector in various locations without compromising image quality. With a 1.2x optical zoom, it allows adjustments to the image size directly from the projector, offering convenience for different screen sizes and room dimensions.

In terms of connectivity, the XV-Z3000 offers multiple input options, including HDMI, VGA, and composite connections, allowing users to connect a variety of devices such as laptops, gaming consoles, and Blu-ray players. Furthermore, it features an easy-to-navigate menu system and remote control, making it user-friendly for all skill levels.

Durability and long lamp life are also significant features of the XV-Z3000. With a lamp life of up to 4000 hours in eco-mode, users can enjoy extended use without frequent replacements. Overall, the Sharp XV-Z3000 combines advanced DLP technology, robust performance, and versatility, making it an excellent choice for anyone looking to invest in a reliable and high-quality projector.
Top Page Image Contents