Sharp MX-7500N, MX-6500N quick start Power notes, Installation notes, About consumables

Page 6

Power notes

WARNING

Do not insert or remove the power plug with wet hands.

This may cause electrical shock.

When removing the power plug from the outlet, do not pull on the cord.

Pulling on the cord may cause damage such as wire exposure and breakage, and may result in fire or electrical shock.

If you will not use the machine for a long time, be sure to remove the power plug from the outlet for safety.

Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements.

Also make certain the outlet is properly grounded. Do not use an extension cord or adapter to connect other devices to the power outlet used by the machine. Using an improper power supply may cause fire or electrical shock.

* For the power supply requirements, see the name plate in the lower left corner of the left side of the machine.

Installation notes

WARNING

Do not install the machine on an unstable or slanted surface. Install the machine on a surface that can withstand the weight of the machine.

Risk of injury due to the machine falling or toppling.

Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements. Also make certain the outlet is properly grounded. Do not use an extension cord or adapter to connect other devices to the power outlet used by the machine. Using an improper power supply may cause fire or electrical shock.

* For the power supply requirements, see the name plate of each machines and devices.

Near a wall

 

30 cm

Be sure to leave the clearances shown right between the unit and the nearest

 

 

 

wall or other surface.

 

 

For easy maintenance, you should also leave the clearances shown right around

30 cm

30 cm

the unit.

 

 

Locations that are excessively hot, cold, humid, or dry. (near heaters, humidifiers, air conditioners, etc.)

The paper will become damp and condensation may form inside the machine, causing misfeeds and dirty output.

Do not install the machine in a location with poor air circulation.

A small amount of ozone is created inside the machine during printing. The amount of ozone created is not sufficient to be harmful; however, an unpleasant odor may be noticed during large copy runs, and thus the machine should be installed in a room with a ventilation fan or windows that provide sufficient air circulation. (The odor may occasionally cause headaches.)

Locations exposed to direct sunlight

Plastic parts may become deformed and dirty output may result.

Locations with ammonia gas

Installing the machine next to a diazo copy machine may cause dirty output.

Locations subject to vibration.

Vibration may cause failure.

CAUTION

The machine includes a built-in hard drive. Do not subject the machine to shock or vibration. In particular, never move the machine while the power is on.

The machine should be installed near an accessible power outlet for easy connection.

Connect the machine to a power outlet which is not used for other electric appliances. If a lighting fixture is connected to the same outlet, the light may flicker.

About consumables

WARNING

Do not throw a toner cartridge into a fire.

Toner may fly and cause burns.

Store a toner cartridge out of the reach of children.

CAUTIONS

6

Image 6
Contents Quick Start Guide Before First USE „„ WarningEarth NeutralLive Information on Disposal „„ In other Countries outside the EUHandling precautions Symbols in this manualPower notes Installation notesAbout consumables Operation Guide Built-in Administrator Machine Adjustment GuideQuick Start Guide this document HintsDownloading Manual Checking the machines IP addressTap Operations Common to ALL Modes Using the Operation GuideTap the Operation Guide key in the home screen Tap Loading Paper in the left menuSettings Mode Tap the Settings key in the home screenPart Names Turning off the power Turning the Power on and OFFTurning on the power Restarting the machineHome Screen Operating the touch panelRemoving misfeeds MaintenanceReplacing a toner cartridge Replacing the waste toner boxPrinter Basic printingCopy settings CopyBasic operations Exposure OriginalOthers Scan settings ScanBasic Operations Scan to E-mail File format Compression mode Number of pages setting File FormatDocument Filing Folder select screenSelect the folder Place the original Job settings menu File list view File thumbnails viewOutput tray settings Copy OutputSaddle Stitch Trimmer SettingDetail setting screen for each folding type Folding functionChecking and changing Output tray Paper Loading and Output SettingsManual Finishing ModeSetting the number Copies number of pages Number of copies settingStaple Saddle Stitch Folding function Specifications Basic Specifications / Copier specificationsAutomatic document feeder Standard equipment Large Capacity TraysLarge Capacity Tray Finisher Saddle stitch finisherCurl Correction Unit Relay UnitHigh Capacity Stacker Punch module MX-PN13A, MX-PN13B, MX-PN13C, MX-PN13D Network Printer SpecificationsNetwork Scanner Specifications Trimming ModuleNoise emission Folding UnitInserter Noise emission valuesSupplies „„ Proper storage „„ Storing toner cartridgesAdministrator Setting mode passwordPassword for logging in from a computer Sizes and Types Paper That can be SET in Each Tray Tray Bypass-TraySizes and Types Paper That can be SET in Each Tray Troubleshooting Canceling an operation and redoing settingsWhen a problem occurs Correctly to the machine? Are you using a paperConnected Is the IP address selectedPage Page Sharp Corporation

MX-7500N, MX-6500N specifications

The Sharp MX-6500N and MX-7500N are advanced multifunction printers designed for high-volume print environments, offering a combination of speed, quality, and versatility. These models are ideal for businesses looking to streamline their document management processes while ensuring professional output.

One of the standout features of the MX-6500N and MX-7500N is their exceptional print speed. The MX-6500N can produce up to 65 pages per minute, while the MX-7500N boasts an impressive speed of 75 pages per minute. This high output allows businesses to handle large print jobs efficiently without sacrificing quality. Additionally, both models support a monthly duty cycle of up to 300,000 pages, making them suitable for demanding workloads.

In terms of print quality, both devices utilize Sharp’s advanced image technology, delivering vibrant colors and sharp text. The high-resolution printing capability, reaching up to 1200 x 1200 dpi, ensures that even the most intricate details are reproduced accurately. This makes them perfect for producing marketing materials, reports, and other critical documents.

The Sharp MX-6500N and MX-7500N are equipped with various finishing options, including stapling, hole-punching, and folding. These features enhance productivity by allowing users to produce professional-quality documents in-house, reducing reliance on external print services. The large, intuitive touchscreen user interface simplifies navigation and helps users quickly access various functions.

These models are designed with efficiency in mind, featuring a dual-scan document feeder that can scan both sides of a page simultaneously, bolstering productivity. They also support a wide range of media types and sizes, allowing users to print on everything from envelopes to larger format paper.

Connectivity is another strong suit of the MX-6500N and MX-7500N, with support for various options, including USB, Ethernet, and Wi-Fi. They are compatible with mobile printing services, allowing users to print documents directly from their smartphones or tablets. Furthermore, built-in security features, such as secure print and user authentication, protect sensitive information.

In conclusion, the Sharp MX-6500N and MX-7500N stand out as powerful, efficient, and versatile multifunction printers tailored for high-demand environments. With exceptional speed, outstanding print quality, and robust finishing options, they provide the ideal solution for businesses seeking to enhance their document workflow and productivity.