Dolby Digital Pro Logic IIx Dolby Pro Logic IIx, System

T 773 OWNER’S MANUAL ADDENDUM

One of the benefits of the T 773 A/V Receiver is its capability for software upgrades. As NAD develops new features, we issue new operational software.

This T 773 has a new version of software installed. There are several new features that are not described in the Owner's Manual that are outlined below, along with the page reference to the original instruction. One exciting new feature is the substitution of the HDCD decoding format with the new Dolby Digital Pro Logic IIx.

Dolby Digital Pro Logic IIx (page 23)

Dolby Pro Logic IIx (page 24)

Dolby Digital Pro Logic IIx and Dolby Prologic IIx processes both stereo and 5.1 signals into a 6.1*- or 7.1- channel output. For both Pro Logic IIx processes you can choose Movie or Music modes to tailor your listening experience to source material. For two channel signals Pro Logic IIx Music mode also features three additional user controls; Dimension, Center Width, and Panorama. The following chart shows the channels available assuming they are enabled in the SPEAKER SETTINGS OSD menu;

	Active Decoded Output Channels

Listening Mode	6.1-Speaker	7.1-Speaker
Two-Channel Sources	System	System

Dolby Pro Logic IIx Music	Front (left & right), Center,	Front (left & right), Center,
Dolby Pro Logic IIx Movie	Surround (left & right), and	Surround (left & right), and Back
	Back Surround	Surround (left & right)

Listening Mode
Multichannel Source

Dolby Digital Pro Logic IIx Music	Front (left & right), Center,	Front (left & right), Center,
	Surround (left & right), and	Surround (left & right), and Back
	Back Surround	Surround (left & right)

Dolby Digital Pro Logic IIx Movie	not available*	Front (left & right), Center,
		Surround (left & right), and Back
		Surround (left & right)

Setup Menus

Since the T 773 was introduced, we have been asked for more flexible options in the Setup Menus. This resulted in adding a more ergonomic interface and new options such as a menu for the Zone settings.

Zone Settings (page 17 Advanced Options)

POWER STATE

There are two settings to allow the second zone to power on or off from the HTR 2 remote control instead of using the ZR 2 remote control. With the HTR 2; toggling the POWER STATE to ON will power on the second zone as indicated in the T 773’s VFD, toggling the POWER STATE to OFF will power off the second zone.

VOLUME CTRL

There are now two primary settings for the second zone volume control; FIXED and VARIABLE. When set to VARIABLE the second zone volume will be adjustable via the ZR 2. When set to FIXED the second zone volume will be set to the preset level as shown on the ZONE SETTINGS, LEVEL. The FIXED setting is the preferred setting when the second zone amplifier has its own volume control (or when using a distribution amplifier with passive ‘impedance matching’ volume controls).

LEVEL (page 12 MS OUT)

This sets the audio volume level at initial power on of the second zone MS OUT (MultiSource Out). Set this level from -75dB to +18dB (the default setting is -20dB). To change this level the VOLUME CTRL setting must be set to VARIABLE. Once the VOLUME CTRL setting is set to FIXED, the level cannot be adjusted. To mute the MS OUT; press ENTER on the HTR 2 and an “M” will show beside the audio volume level to indicate muting.

AUTO TRIG IN

This feature was formerly named AUTO TRIGGER, and still functions as it did before.

ZONE SPEAKER

The internal amplifiers can be used by the MS OUT, either all or some of SPEAKERS A or SPEAKERS B. Assign either speaker set to be active when the second zone powers on. The settings for ZONE SPEAKER are; SPEAKER A, SPEAKER B and NONE.

Note: Using this feature requires that the Pre-Out/Main-In jumper be removed and the MS Out be connected to the Main-In of the desired channels using RCA to RCA cables (not supplied). To access the Speaker A

+B feature, the Front L + R amplifier channels should be used. The Front L +R Pre-Out should then be connected to the Surround Back L + R Amp-In jacks with the main zone front speakers attached to these speaker outputs. Obviously, any amplifier channels used for second zone will no longer be available in the main zone. This does allow the 7 channel T 773 to operate a 5.1 surround system in the main zone and a simultaneous independent stereo feed to a second remote zone.

Advanced Options (page 17)

Dolby Digital Pro Logic IIx is now a surround mode selection available by the HTR 2’s and T 773’s front panel button, SURROUND MODE.

T 773 specifications

The NAD T 773 is a high-performance audio receiver that has garnered attention among audiophiles and home theater enthusiasts. This model embodies innovation and technology that cater to contemporary sound demands, making it a formidable option for anyone looking to improve their audio experience.

One of the standout features of the NAD T 773 is its robust power output. With an impressive seven channels, it is capable of delivering a strong and clear sound across a wide range of frequencies. This power is harnessed through NAD's proprietary PowerDrive technology, which ensures that the receiver can adjust its output depending on the impedance of the connected speakers. Thus, users can expect uncompromised audio quality regardless of the system configuration.

In addition to its powerful amplification, the T 773 integrates advanced digital signal processing capabilities, which allows it to translate various audio formats accurately. Its ability to decode and process high-definition audio formats makes it a perfect match for today’s content, from streaming services to Blu-ray. The receiver supports Dolby Digital and DTS surround sound formats, providing an immersive audio experience that envelops the listener.

Another remarkable characteristic is the T 773's versatility in connectivity. It offers an array of HDMI inputs to accommodate multiple devices, such as gaming consoles, media players, and smart TVs. This ensures seamless integration into any home entertainment setup. Furthermore, the inclusion of digital and analog audio inputs means users can connect older audio equipment without hassle.

The design of the NAD T 773 is also worth noting. It features a sleek, modern aesthetic that easily fits into various interior styles. The user interface is intuitive, featuring a well-organized display that simplifies navigation through settings and modes. Additionally, NAD has prioritized build quality, resulting in a durable and reliable product that stands the test of time.

To summarize, the NAD T 773 is a powerful and versatile audio receiver that incorporates innovative technologies like PowerDrive and advanced audio processing. Its comprehensive connectivity options, combined with user-friendly design, make it an excellent choice for anyone seeking to enhance their home theater or audio system. Whether for movies, music, or gaming, the NAD T 773 promises an elevated listening experience.