Sharp EL-9600 Sending programmes from a PC, Click on the OK button, To display the execute menu

Press ALPHA

●Sending programmes from a PC:

1.Using the CE-LK1, select the Communication Port from the Link menu and click on the port to be used.

2.Turn off the EL-9600/9400 and connect it to the PC.

3.Turn on the EL-9600/9400

4. Select Send… from the Link menu of the CE-LK1 (See right)

5.Specify the kind of drive, folder, and file, then select the file to be sent from the file list, and click on the Select button.

6.Click on the OK button.

Note : For further details refer to the manual.

2. Executing a programme:

1.	Press	2nd F		PRGM		to display the execute menu.
2.	Press				and choose the number of the programme you wish to
		A	ENTER
	execute.					(See right)
3.	Follow the instructions.

3. Deleting a programme:

Press 2nd F OPTION C and then choose be deleted.

5

to select the programme to

Note: Do not try to erase a programme by resetting all memories to the initial condition as programme data to be stored will also be deleted. Also, it is advised to use the CE- LK1 PC link software to back up any programmes not to be erased.

4. Using the keys:

Press

2nd F to use secondary functions (in yellow).
	sin-1
To select “sin-1”:	2nd F sin ➔ Displayed as follows: 2nd F sin-1

to use the alphabet keys (in blue).

To select A: ALPHA sinA ➔ Displayed as follows: ALPHA A

Press

2nd F A-LOCKto continue input of blue letters.

To input ABC: ALPHA A ALPHA A ALPHA A

or

2nd F A-LOCK A A A

(To return to the normal function, press

ALPHA again.)