Connections
CONNECTING TO A TV
To SCART
VIDEO OUTPUT SELECT switch
|
|
|
| DIGITAL | AUDIO |
|
|
|
| OUT | OUT |
|
|
|
| COAXIAL | L |
|
| DIGITAL |
|
|
|
|
| OUT |
|
|
|
|
|
|
| R | |
|
|
|
|
| |
|
|
| TO TV |
|
|
|
|
| COMPONENT |
|
|
PAL | AUTO | OPTICAL | VIDEO | VIDEO | |
| NTSC |
| OUTPUT | OUT | OUT |
For using SCART’s RGB signal, set the VIDEO OUTPUT switch to COMPONENT or for using
To | To AUDIO (L/R)/VIDEO OUT |
|
Audio/Video cable (supplied)
If the TV has an
To
To video input
To audio input
To
TV or monitor with audio/video inputs
GB
NOTES
•Refer to the owner’s manual of your TV as well.
•Before you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.
•Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback picture will be distorted because DVD video discs are copy protected.
•In case of the TV set corresponding to RGB signal, the RGB signal is automatically selected in the TV (Only when the VIDEO OUTPUT Switch is set to COMPONENT on the Rear Panel).
WARNING
Do not set the Digital Audio Output of this DVD player to Dolby Digital unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to Selecting Digital Audio Output on page 20).
13