Sharp AR-800 manual Specification s

s p e c i f i c a t i o n s

G E N E R A L S P E C I F I C A T I O N S

Type:	Console
Copy System:	4-beam Laser Electronic
Originals:	Sheets, bound document, photographs
Original Size:	Max. 11" x 17"
Copy Sizes:	Max. 11" x 17"; Min. 5.5" x 8.5"
Copying Speed:	80 ppm (8.5" x 11" at 100% ratio)
	61 ppm (letter-R)
	52 ppm (legal)
	43 ppm (ledger)
Continuous Copy:	Max. 999
Copy Ratio:	25%-400% in 1% increments
	Fixed Presets: 25%, 50%, 64%, 78%, 95%,
	100%, 121%, 129%, 141%, 200%, 400%, 800%
Printing Resolution:	600 x 2400 dpi (with smoothing)
Gradation:	256 levels
Duplexing:	Standard
First Copy Time:	Approx. 3.6 seconds
Warm-Up Time:	Approx. 7 minutes
Original Feed System:	Reversing Automatic Document Feeder (RADF)
Hard Drive:	3.2 GB
Memory Size:	32 MB

Document Storage Capacity: 1,000 pages (letter-size)

Copy Paper Feed:	3,500-Sheet Adjustable Paper Cassettes
	4,000-Sheet Large Capacity Feeder
	100-Sheet “Smart” Bypass Tray (letter-size)
Fusing System:	Heat Rollers
Developer System:	Dry Developer
Exposure System:	Moving optical source, slit exposure (stationary
	platen) with automatic exposure function
Light Source:	Halogen Lamp
RequiredPowerSupply:	115 Volts, 60Hz, 20 Amp Dedicated
Power Consumption:	Maximum 2.0 kw
Dimensions:	36.3" x 29.2" x 43.7" (w x d x h)
Weight:	Approx. 550 lbs.
E M B E D D E D C O N T R O L L E R S P E C I F I C A T I O N S
PDL Support:	PCL5e/ + PCL XL, Postscript Level II Emulation
Memory:	16 MB Standard; 48 MB max.
CPU:	PowerPC 603e 200 MHz
Client Operating	Windows® 3.1, 95, 98, 2000, NT 4.0,
System Support:	Macintosh®, UNIX®, HP/Sun, Solaris
Network Operating	Netware® 3.x, 4.x, 4.x (NDS) Windows®
System Support:	95, 98, ME, 2000, NT 4.0, UNIX®
Protocol Support:	IPX/SPX, TCP/IP, Ethertalk®, LPR/LPD, SNMP
I/O Interface:	10BaseT, 10Base5, 10Base2, 100BaseT

Print Resolution:	600 x 2400 dpi
Print Speed:	Equivalent to engine speed
Duty Cycle:	Equivalent to engine duty cycle
Paper Supply	3 x 500-Sheet Cassette, 4,000-Sheet LCT
Acceptable Paper Sizes:	Statement-R (5.5 x 8.5) to Ledger (11 x 17),
	17-22 lbs; Manual feed from Stack Feed
	“Smart” Bypass 16-41 lbs. (90 lb. index)
Acceptable Paper:	Standard bond, overhead
Multiple Prints:	1-999
Page Orientation:	Portrait or landscape
Simplex/Duplex:	Simplex & Duplex Printing Control
Duplex Modes:	Short Edge Bind/Long Edge Bind
Finishing:	Sort/Staple, Sort & Saddle Stitch
	(optional finisher required)
Paper Sources:	All available sources & Stack Feed
	“Smart” Bypass
A R - F N 8 F I N I S H E R S P E C I F I C A T I O N S
Copy Paper Size:	Statement to Ledger
Thickness:	Non-staple: 16-41 lbs. (90 lb. index)
	Staple: 17-22 lbs.
Stapling Function:	50 sheets
Power Requirements:	Supplied from copier
Dimensions:	28.2" x 23.7" x 39.9" (w x d x h)
Weight:	79 lbs
A R - F N 9 S A D D L E - S T I T C H F I N I S H E R S P E C I F I C AT I O N S
Copy Paper Size:	Statement to Ledger
Thickness:	Non-Staple: 16-41 lbs. (90 lb. index)
	Staple: 17-22 lbs.
Stapling Function:	50 sheets
Stapling Function Saddle Stitch: 15 sheets
Copy Paper Size (Saddle Stitch): Letter, Ledger
Power Requirements:	Supplied from copier
Dimensions:	28.2" x 23.7" x 39.9" (w x d x h)
Weight:	122 lbs.
A R - P N 2 B H O L E P U N C H U N I T S P E C I F I C A T I O N S
Copy Paper Size:	Letter to Ledger
Thickness:	16-41 lbs. (90 lb. index)
Hole Punch Function:	2 or 3 hole punch capability
Power Requirements:	Supplied from copier

Design and specifications are subject to change without notice. Sharp is a registered trademark of Sharp Corporation. All trademarks and registered trademarks are owned by their respective holders.

SHARP ELECTRONICS CORPORATION

Network Office Systems Group

Sharp Plaza, Mahwah, NJ 07430-2135

1-800-BE-SHARPwww. sharpusa . com

As an ENERGY STAR® Partner,
SHARP has determined that this
product meets the ENERGY STAR®
guidelines for energy efficiency.	CPD-3457