Sharp AR-F152 operation manual Copier TROUBLE?, Misfeed Removal

Page 29

COPIER TROUBLE?

This chapter describes misfeed removal and troubleshooting.

MISFEED REMOVAL

When the misfeed ( ) indicator blinks or

blinks in the display, the copier will stop because

of a misfeed.

 

If a misfeed occurs when using the SPF, a number may appear in the display after a minus sign. This indicates the number of the originals that must be returned to the document feeder tray after a misfeed. Return the required number of originals. Then this number will disappear when copying is resumed or the clear () key is pressed.

When the SPF misfeeds an original sheet, the copier will stop and the SPF misfeed ( ) indicator will blink, while the misfeed ( ) indicator will remain off. For a misfeed of originals in the SPF, see “E Misfeed in the SPF” on page 31.

This copier is turned on with the lower side cover open, the misfeed ( ) indicator will blink. In this case, close the lower side cover. The misfeed ( ) indicator will go out.

Ensure that the bypass tray is open and then open the side cover while pressing the side cover open button.

Check the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below.

If blinks in the display, proceed to “A Misfeed in the paper feed area”. (p. 28)

If paper is misfed here, proceed to “B

Misfeed in the fusing area”. (p. 28)

5

Copier trouble?

If the misfed paper is seen from this side, proceed to “C Misfeed in the transport area”. (p. 29)

If paper is misfed here, proceed to “A

Misfeed in the paper feed area”. (p. 28)

If paper is misfed here, proceed to “D Misfeed in the

lower paper feed area”. (p. 30)

27

Page 28 Page 30
Image 29
Page 28 Page 30
Contents AR-F152 For Your Records Contents Appendix Conventions used in this manual Getting StartedIntroduction Safety Precautions Main Features Part Names Operation Panel Do not install your copier in areas that are Copier InstallationBe sure to allow the required space around Loading Copy Paper Loading Copy Paper Normal Copying Making CopiesWhen using the original table When using the SPFTens digit Stream feeding mode Exposure ADJUSTMENT/PHOTO CopyingREDUCTION/ENLARGEMENT/ZOOM To select a preset copy ratio To select a zoom ratioBypass Feed including special paper TWO-SIDED Copying TWO-SIDED Copying Preheat mode Toner Save ModeAuto power shut-off mode Special FunctionsToner Save Mode OFF Displaying Total Number of CopiesToner Cartridge Replacement Supplies and User MaintenanceToner Cartridge Replacement Toner cartridge life User MaintenanceCabinet Original table and original coverTransfer charger When copier is not in useMisfeed Removal Copier TROUBLE?Misfeed in the paper feed area Misfeed in the fusing areaMisfeed in the transport area Misfeed in the lower paper feed area Misfeed in the SPF Developer Required Maintenance RequiredProblem Possible cause Solution See TroubleshootingIndication Cause and remedy See Status IndicatorsAutomatic Exposure Adjustment Appendix SpecificationsSpecifications Types and sizes of copy paper SuppliesProper storage Maintenance InstallationIndex NamesIndex Material Safety Data Sheet Section Physical Chemical Characteristics Osha PEL Acgih TLV None required under normal use Memo Memo Memo Page Sharp Electronics Corporation

AR-F152 specifications

The Sharp AR-F152 is a multifunctional printer that blends compact design with impressive performance, making it a suitable choice for small to medium-sized businesses. Positioned in the category of reliable black-and-white copiers, this model stands out for its versatility and ease of use.

One of the key features of the AR-F152 is its ability to print, copy, and scan, providing a comprehensive solution for office tasks. With a printing speed of up to 15 pages per minute, it helps improve workflow efficiency. The device supports various paper sizes, including A4, A5, and envelopes, offering flexibility for different printing needs. Additionally, it boasts a maximum paper capacity of up to 250 sheets, which means less frequent reloading and more uninterrupted productivity.

The AR-F152 operates using Sharp’s advanced digital imaging technology. This ensures high-quality prints with sharp text and clear images, which are essential for professional documents. The resolution can reach up to 600 x 600 dpi, allowing for crisp and detailed outputs, making it suitable for everything from internal memos to client presentations.

Another significant aspect of the AR-F152 is its user-friendly interface. Featuring a vibrant LCD display, navigation is simple, and users can easily access various functions. The model also supports multiple connectivity options, including USB and network interfaces, allowing it to be integrated smoothly into existing office setups. This connectivity is crucial for businesses seeking to streamline their operations and ensure seamless collaboration among team members.

Energy efficiency is also a highlight of the AR-F152. It features low power consumption and an eco-friendly mode that reduces energy usage during idle times. This not only contributes to cost savings but also supports corporate sustainability initiatives.

In summary, the Sharp AR-F152 is a robust multifunction printer that delivers speed, quality, and efficiency. Its combination of advanced technology, user-friendly features, and compact design makes it an excellent choice for businesses looking to enhance their document management processes while maintaining a professional standard in their outputs.
Top Page Image Contents