NAD T 753 owner manual Digital Input Jack

Page 11

FRONT PANEL

11SOURCE : Use to select one of six inputs. Press repeatedly to step through the T 753’s audio/video inputs. The digital inputs are default assigned to the video input (DVD, SAT, VCR, VIDEO 4-5, CD) but can be arranged in any order using the T753’s SETUP OSD. The chart below shows the default assignments; see “Input Setup.”

Digital Input Jack

Default Assignment

OPT 1

DVD

OPT 2

SAT

Coax 3

VCR

Coax 4

VIDEO 4

Coax 5

VIDEO 5

Coax 6

CD

NOTE: Digital inputs take precedence: The T 753 will automatically play any active signal present at the selected digital input; if none is present, it will “fall back” to the analog audio input assigned to that Video input. Digital inputs can be selected OFF to listen to the analog input of a source with an assigned digital input.

12SURROUND MODE: Use to select the T 753’s Listening Mode. Press repeatedly to step through the T 753’s Listening Modes. See “About the T 753’s Listening Modes,” below.

NOTE: Depending on the format of the currently selected input (digital or analog; stereo or multichannel), different modes will be available. See “About the T 753’s Listening Modes,” below.

13LEVELS: Press repeatedly to select the channel, and then use the VOLUME(SETUP) knob to adjust the levels of the T 753’s 7 channels /pairs in turn: front-left, -center, –right; surround; surround back; subwoofer. The selected channel appears on the VFL and on-screen displays; use the VOLUME(SETUP) knob to adjust its level relative to the others over a range of ±12 dB. Channel levels may also be adjusted via the on-screen menus; see “Adjusting Channel Levels,” below.

NOTE: The HTR 2 remote’s [Surr.], [Center], and [Sub] / keys provide direct access to those channels’ relative levels, however in this case the level changes are only temporary and are not saved in memory.

14TONE DEFEAT: Press to disable the tone controls; press again to re-enable them for instance, to compare a tone setting to unmodified sound.

NOTE: While TONE DEFEAT is engaged, the TONE CONTROLS key will have no effect.

15TONE CONTROLS: Press to adjust treble using the VOLUME (SETUP) knob over a ±10 dB range; press again to adjust bass, and a third time to exit tone-control adjustment.

16SPEAKERS A & B: Press either speaker A or B or both to select the set of speakers you wish to listen to. The Speakers A are the main set of 6 multi- channel front and surround speakers. The Speaker B are an auxiliary set for remote locations such as other rooms of your home. For Speaker B selection all surround sound sources are downmixed to stereo as shown in the florescent display.

17VIDEO 6 INPUT: Use these convenience jacks for occasional sources, such as a camcorder, portable MP3 or tape player, or a video game console, or any other analog audio, or composite or S-Video video source. Select the Video 6 input using the HTR 2 remote, or the front-panel VIDEO 6 key.

18PHONES: Accepts stereo headphone using a standard 1/4-inch stereo phone plug (use a suitable adapter for headphones equipped with a smaller plug); set the Listening Mode to “Stereo.” Plugging in headphones automatically mutes output from all channels’ speaker and pre-out jacks (but not from the record-out jacks of TAPE, VCR, or VIDEO 4).

NOTE: For headphone listening the front left/right speakers must be set to “Large” on the OSD’s Speaker Settings page, otherwise headphone bass response will be restricted.

NOTE: Plugging in headphones will automatically switch the T 753 to “Stereo” mode.

ENGLISH

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents English Installation Safety InformationExplanation of Graphical Symbols PrecautionsDo not Attempt to Service the Unit Yourself OWNER’S Record Electric PowerMaintenance Damage Requiring ServiceTable of Contents Getting the Most from the NAD T Using the HTR 2 Remote ControlTroubleshooting Specifications Choosing a Location Unpacking and SetupConnecting AM Antenna WHAT’S in the BOXIntegration About the TR.S., Matrix and Digital Surround Ease of USEUpgradability About the HTR 2 System Remote ControlPlay a DVD Movie QuickstartSearch Front PanelDigital Input Jack +12V Trigger IN/OUT Rear PanelRear Panel Dealing with HUM and Noise Setting UP the TGetting Started Display the OSD Input SetupInput Settings About the ON-SCREEN Displays OSD and FRONT-PANEL ReadoutListening Mode Speaker SetupSpeaker Settings Setting Speaker Distance CHANNEL-BALANCE Test SetupUsing AN SPL Meter Setting Channel BalanceRecalling Presets Creating PresetsUsing the T Choosing the FM Mute / Mode Tuning StationsSetting Radio Presets Selecting Radio PresetsDTS NEO 6 Surround DTS ES Expanded Surround DTS ESDTS-ES Discrete DTS ES MatrixDolby PRO Logic II Music Dolby PRO LogicDolby PRO Logic II Surround Dolby PRO Logic II MovieDTS Displaying the Signal ModeSelecting Listening Modes DTS Neo Adjusting Listening ModesAdjusting the Tone Controls Surround Sound Channel ChartAdjusting Channel Levels on the FLY To Adjust Channel LevelsLearning Codes from Other Remotes Using the HTR 2 Remote ControlSpecifications Controlling the TRecording Macros Copy a Command from Another KEYMacro Commands PUNCH-THROUGHLoading CODE-LIBRARIES KEY-ILLUMINATION TimeoutFactory Reset Delete ModeAssigning the Trigger Output Using the ZR 2 Remote ControlTrigger Setup Summary of HTR 2 ModesCondition Possible Causes Possible Solutionss TroubleshootingAmplifier Section SpecificationsPhysical Specifications AV Surround Sound ReceiverNAD

T 753 specifications

The NAD T 753 is a high-performance home theater receiver that exemplifies NAD's commitment to quality audio reproduction and innovative design. Known for its exceptional sound quality and versatility, the T 753 is designed to satisfy both casual listeners and serious audiophiles.

One of the defining features of the NAD T 753 is its robust power amplification. With a rating of 7 x 60 watts into 8 ohms, the receiver is equipped to handle a wide range of speakers and setups. The added Dynamic Power capability ensures that the receiver can deliver additional power during peak moments in audio playback, allowing for a more dynamic and impactful sound experience. This is particularly important when watching movies or engaging in immersive gaming, where transient sound effects can be demanding.

NAD has integrated their proprietary technologies into the T 753, notably the PowerDrive technology, which allows the receiver to efficiently manage power output across different impedance loads. This ensures that the T 753 maintains clarity and control even at high volumes, reducing the risk of distortion. Another key technology is the Soft Clipping feature, which gently limits the output signal when the system is pushed to its limits, preventing harsh clipping and preserving sound quality.

In terms of connectivity, the T 753 is versatile, equipped with multiple HDMI inputs that support both video and audio, making it compatible with the latest HD and 4K devices. The receiver also features component and composite video inputs, as well as digital and analog audio connections, ensuring it can integrate seamlessly into existing home entertainment systems.

The user-friendly interface of the T 753 includes an intuitive on-screen display that simplifies system setup and operation. Users can easily navigate menus and adjust settings to customize their listening experience. The inclusion of a remote control further enhances convenience, allowing users to control multiple devices from a single point.

One of the standout characteristics of the NAD T 753 is its capacity for multi-channel audio formats. It supports DTS, Dolby Digital, and other surround sound formats, creating an immersive audio environment ideal for movie nights or concerts. The receiver also includes a powerful built-in equalizer, allowing users to tweak audio frequencies to better suit their acoustics, ensuring a tailored audio experience.

In conclusion, the NAD T 753 represents a harmonious blend of power, versatility, and advanced technology. Its sound quality, coupled with comprehensive features and user-friendly design, makes it an outstanding choice for home theater enthusiasts looking to enhance their audio experience. Whether for music or movies, the NAD T 753 delivers exceptional performance that stands the test of time.
Top Page Image Contents