Sharp VT19B-PW manual Color, Clear Moire, Focus, Degauss

MENU FEATURES CONT.

Feature	Function
Color	Color temperature is a measure of the “warmth” of the image colors. The
	available range is between 5000 to 9300K. Follow these steps to change the
	color temperature and adjust individual R,G,B color control.
	1.With the menu off, push the MENU button. Push the Õ or Ö button until the
	“Color” screen is displayed.
	2.Use the × or Ø button to select Color1, Color2, or Color3.
	3.Push the MENU button to open the “Color1”, “Color2”, or “Color3”
	adjustment screen.
	4.The current color temperature is shown highlighted between 9300 and
	5000K. Use the Õ or Ö button to adjust the color temperature.
	5.Adjust the color temperature as close to the desired temperature as
	possible using only the Õ and Ö buttons. To fine tune the color hue, use
	the × or Ø button to select R(ed), G(reen), or B(lue), then use the Õ and
	Ö buttons until you reach the desired color.
	Note: Recall does not reset the color settings.
Clear Moire	A “moire” pattern	can appear on your screen, looking like a series of
	concentric circles or arcs. To eliminate this pattern, use the clear moire
	adjustments.
	1.With the menu off, push the MENU button. Push the Õ button or Ö button
	until the “Screen” OSD is displayed.
	2.Use the × or Ø button to select Clear Moire.
	3.Push the MENU button to open the clear moire adjustment screen.
	Use the Õ or Ö button to adjust horizontal moire; use the × or Ø button to
	adjust vertical moire.
Focus	Use the focus control when the image displayed on the screen is not sharp in
	all areas.
	1.With the menu off, push the MENU button. Push the Õ or Ö button until the
	“Screen” OSD is displayed.
	2.Push the × or Ø button to select Focus.
	3.Push the MENU button to open the Focus adjustment screen.
	Use the Õ or Ö button to adjust focus along the left and right areas of the
	screen; use the × or Ø button to adjust the center area of the screen.
Degauss	The Degauss feature will remove color impurities caused by magnetic fields.
	Do not use the Degauss feature more than once within a 30-minute period.
	1.With the menu off, push the MENU button. Push the Õ or Ö button until the
	“Advanced” screen is displayed.
	2.Push the × or Ø button to select Degauss.
	3.Push the MENU button to execute the Degauss function. The degaussing
	screen will appear.
	Note: The monitor may buzz momentarily, the image colors may change
	and the image will jiggle for a few seconds. These effects are normal.
	4.After a few seconds, the degauss main menu will return.
		-7-
19” Fast Scan Series User Guide		150-062