Touch Panel Settings NOPERATION Setting | Sharp PNL601BPKG specification

Touch Panel Settings

Set the function that activates when function button 1 is pressed with the touch pen.

•	RightClick	:	Functions as a right click.
•	Disable	:	Disables function button 1.

Function Button 2

Set the function that activates when function button 2 is pressed with the touch pen.

•	Pen Software Link :		Functions as a link button for a Pen Software function.
•	Disable	:	Disables function button 2.

TIPS

• The Pen Software function that links to function button 2 is set in the Pen Software.

Set the input mode for the touch panel. It is normally recommended that you use “Standard”.

•	Standard	: Automatically switches between pen mode and handwriting mode.
•	HandWrite	: Select this when you only wish to use your finger and will not be using the touch pen function.
•	Pen	: Select this for operation by touch pen only. Only the touch pen can be used; your finger cannot be used.

Specify whether the area (rectangle) of a touched item is detected. The application must support area detection.

•	Enable	: When the screen resolution is changed, a message is displayed regarding the calibration setting.
•	Disable	: When the screen resolution is changed, the previously set calibration values are automatically applied. When a
		resolution is used for the first time, the message regarding the calibration setting will appear.

For normal operation and writing text by hand, this setting is not necessary.

When manipulating a document with a small click range for HTML links, enable this and adjust the effective “Click range”.

7 E