Sharp XG-C435X-L, XG-C465X-L Displaying and Setting the Break Timer, Switching the Eco+Quiet Mode

Page 37

MOUSE/Adjustment buttons ('/"/\/)

BREAK TIMER button

AUTO SYNC

FREEZE

button

button

 

ECO+QUIET button

Displaying and Setting the Break Timer

1Press BREAK TIMER.

•The timer starts to count down from 5 min- utes.

On-screen display

2Press '/"/\/to adjust the length of the break time.

•Increases with ' or

5 minutes s6 minutes s60 minutes

•Shortens with \ or "

4 minutes s3 minutes s1 minute

•The break time can be set in units of one minute (up to 60 minutes).

Canceling the break timer display function

Press BREAK TIMER.

Note

•Break Timer does not function while the projec- tor is operating the “Auto Sync”, “FREEZE” or “AV MUTE” functions.

Switching the Eco+Quiet Mode

Press ECO+QUIETto switch the Eco+Quiet mode between on and off.

•When the Eco+Quiet Mode is set to “ON”, the sound of the cooling fan will turn down, the power consump- tion will decrease, and the lamp life will extend.

Note

•Refer to “Checking the Lamp Life Status” on page 53 for details of the Eco+Quiet mode.

Auto Sync

(Auto Sync Adjustment)

Auto Sync function works when detecting input signal after the projector turns on.

Press AUTO SYNC to manually adjust with Auto Sync function.

Note

•When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjust- ments. (See page 47.)

Freezing a Moving Image

1Press FREEZE.

•The projected image is frozen.

2Press FREEZE again to return to the moving image from the cur- rently connected device.

Basic Operation

-35

Page 36 Page 38
Image 37
Page 36 Page 38
Contents XG-C465X-L XG-C435X-L Model No Serial No Introduction Product Disposal Buttons used in this Info Indicates safeguards when using the projectorOperation Contents Setup Manual For Windows¨ When you want to view the setup manualFor Macintosh¨ Accessories CleaningPower Sources Power-Cord ProtectionAvoid locations with extremes of tem- perature Rest your eyes occasionallyTemperature monitor function Using the projector in other countriesOther connected equipment Supplied accessories AccessoriesOptional accessories Optional lenses Throw DistanceLens ScreenProjector Part Names and FunctionsTerminals Using the Remote Control with a Signal Cable Remote ControlPart Names and Functions When using the remote control Using the Remote ControlUsable Range Inserting the BatteriesQuick Start Setup and ProjectionAdjust the angle Setting Up the Projector Setting Up the ProjectorMenu item ÒFrontÓ Projection PRJ ModeMenu item ÒRearÓ Normal Mode Setting Up the ProjectorStretch Mode Standard Zoom LensSamples of Cables for Connection You may need other cables or connectors not listed belowSamples of Cables for Connection Supplied RGB cable Accessory Connecting to a ComputerWhen connecting with a DVI digital cable Connecting to a ComputerWhen connecting video equipment with a DVI output terminal Connecting to Video EquipmentWhen connecting video equipment with video output terminal Connecting to Video EquipmentControlling the Projector by a Computer AccessoryWhen connecting to the LAN terminal using a LAN cable Connecting to a Monitor with RGB Input TerminalControlling the Projector by a Computer Connecting to an Amplifier or Other Audio Equipment Turning the Power Off Put Connecting the Power CordTurning the Projector On/Off Turning the Projector OnPress the Height Adjustment but- tons Using the Adjustment FeetAdjustment foot Height Adjustment button Tilt dial Image ProjectionCorrecting Trapezoidal Distortion Button MOUSE/Adjustment Buttons //\ Return buttonImage Projection Press KeystoneZoom knob Adjusting the LensOut Zoom Adjusting the Volume Switching the Input ModeVOL +/- Volume buttons AV Mute button Video buttonsSwitching the Eco+Quiet Mode Displaying and Setting the Break TimerAuto Sync Auto Sync Adjustment Freezing a Moving ImagePress Magnify on the remote control Selecting the Picture ModeDisplaying an Enlarged Portion of an Image Press Resize Resize button Resize ModeVIDEO/DTV About CopyrightsWhen moving the cursor Using the Remote Control as the Wireless Computer MouseWhen left-clicking When right-clickingFollowing shows the items that can be set in the projector Menu ItemsÒSignal adjustment SIG-ADJÓ menu Menu Items Projector adjustment PRJ-ADJ menuMenu Selections Adjustments Using the Menu ScreenPress or \ and select ÒPic- tureÓ to adjust Press MenuUsing the Menu Screen To adjust the pro- jected image while watching itPress or and select ÒBrightÓ to adjust Press \ or to adjust the item selectedSelecting the Picture Mode Picture Adjustment ÒPictureÓ menu2Adjusting the Image 8Eco+Quiet Mode Setting Selecting the Film ModePicture Adjustment ÒPictureÓ menu Reducing Image Noise DNRAuto Sync Adjustment Signal Adjustment ÒSIG-ADJÓ MenuSignal Type Setting Resolution SettingSetting the Video System Checking the Input SignalSignal Adjustment ÒSIG-ADJÓ Menu Selecting the Dynamic RangeSetting the Resize Mode Screen Adjustment ÒSCR-ADJÓ MenuAdjusting the Image Position 3Keystone CorrectionScreen Adjustment ÒSCR-ADJÓ Menu Setting the On-screen Display7Reversing/Inverting Pro- jected Images 8Selecting the On-screen Display Language4Speaker Setting Auto Power Off FunctionAudio Output Type Setting Auto Restart FunctionHelpful Functions Set during Installation ÒPRJ-ADJÓ menu 9Fan Mode Setting8Selecting the Transmis- sion Speed RS-232C System Lock FunctionKeylock Function Returning to the Default SettingsChecking the Lamp Life Status Locking the Operation Buttons on the ProjectorIf you forget the password Setting a PasswordSelect ÒPasswordÓ, then press TCP/IP Setting Dhcp Client SettingSet the TCP/IP manually You can confirm the MAC address and projector nameCleaning the projector MaintenanceCleaning the lens Cleaning the exhaust and intake ventsReplacing the Air Filter Disconnect the power cordReplacing the Air Filter Remove the filter coverReplacing the Air Filter Place a replacement air filterReplace the filter cover About the temperature warning indicator Maintenance IndicatorsAbout the lamp indicator Maintenance Indicators Lamp Regarding the LampReplacing the Lamp Regarding the Lamp Removing and Installing the Lamp UnitRemove the lamp unit cover Remove the lamp unitConnect the power cord Resetting the Lamp TimerReset the lamp timer Insert the new lamp unitPage Computer Computer Compatibility Chart23-29 TroubleshootingProblem Check For Sharp Assistance Specifications Audio output terminal Auto V-Keystone IndexSharp Corporation
Related manuals
Manual 73 pages 51.24 Kb

XG-C435X-L, XG-C465X-L specifications

The Sharp XG-C465X-L and XG-C435X-L projectors are sophisticated devices designed for a range of professional environments, including corporate settings, educational institutions, and high-stakes presentations. Both models boast impressive specifications and features that cater to users seeking high-quality projection capabilities.

Firstly, the XG-C465X-L model is equipped with a WXGA resolution of 1280 x 800 pixels, making it ideal for displaying detailed graphics and videos with clarity. It delivers a brightness of up to 4600 ANSI lumens, ensuring that presentations remain vivid even in bright rooms. The contrast ratio of 5000:1 further enhances image quality, allowing for deeper blacks and brighter whites, which makes content more engaging.

On the other hand, the XG-C435X-L features a slightly lower brightness level of 4300 ANSI lumens while maintaining the same WXGA resolution. This makes it a suitable choice for users who need a dependable projector in slightly darker environments. The contrast ratio for this model is also impressive, at 4000:1, providing excellent image depth.

Both projectors utilize DLP (Digital Light Processing) technology, which is known for its reliability and vibrant color reproduction. This technology significantly reduces the chances of image distortion and offers sharp edges for text and graphics, making it perfect for detailed presentations. Additionally, the projectors come with a long-lasting lamp life of up to 5000 hours in eco mode, allowing for extended use without frequent replacements.

Connectivity options are another significant highlight of these projectors, as they support HDMI, VGA, and various audio inputs, ensuring compatibility with a range of devices such as laptops, Blu-ray players, and video conferencing systems. The inclusion of a USB port further adds versatility, allowing for presentations directly from USB drives without the need for a computer.

User-friendly features such as keystone correction and a flexible lens system make installation and setup straightforward, while the built-in speaker eliminates the need for external audio solutions in smaller setups. The lightweight design of both models makes transportation easy, a beneficial feature for users who frequently move between locations.

In summary, both the Sharp XG-C465X-L and XG-C435X-L projectors are built to meet the demands of various professional environments, offering high brightness, superb image quality, and versatile connectivity options. Their technological advancements and user-friendly features solidify their place as strong contenders in the projector market.
Top Page Image Contents