DLP
Starting and Shutting down the Projector
1. Slide the lens cover.
2. Connect the power cord to the projector [A]. Connect the other end to a wall outlet.
Switch [B] from off (O) to on ( — ).
3.
4.
Wait for the POWER and READY LEDs on the projector to turn on. Turn on the connected devices.
Ensure the READY LED is on and steady (not flashing) orange and then press the POWER button to turn on the projector.
The start up tones sound and the projector starts a warm up cycle.
Caution:
DO NOT remove the keypad when the projector is powering on or off.
The projector splash screen displays and connected devices are detected.
If the connected device is a PC, press the appropriate keys on the computer keyboard to switch the display output to the projector. (Check the user manual of the PC to determine the appropriate Fn key combination to change display output.)
See Setting an Access Password (Security Lock) on page 14 if Security Lock is enabled.
– 12 –