Runco VX-4000ci manual Input Position

Page 30

SHARPNESS adjusts the amount of high-frequency detail in the image. This can be adjusted to the preference of the user. Keep in mind that when SHARPNESS is decreased, fine details in the image will become 'soft'; when it is increased, fine details will become sharper but will also make the picture appear 'noisy' if adjusted too high.

All the picture adjustments (contrast, brightness, color, tint and sharpness) must be saved man- ually to Custom 1 or Custom 2 under ISF presets menu. If not, all the picture adjustments will be whited out when ISF presets (ISF Night, ISF Day, Custom 1, Custom 2) are changed.

Input Position

Indicates selection has been made for the Input Position selection menu

Press ENTER to allow shifting the Image Position Left/Right with the LEFT and RIGHT arrows.

Press ENTER to allow shifting the Image Position Up/Down with the LEFT and RIGHT arrows.

Press ENTER to allow shifting the Image Position Width with the LEFT and RIGHT arrows.

Press ENTER to allow shifting the Image Position Height with the LEFT and RIGHT arrows.

Press ENTER to allow shifting the Image Position Overscan percentage with the LEFT and RIGHT arrows.

ISF Presets

Indicates selection has been made for the ISF Presets selection menu.

Press ENTER to select the ISF Night calibration settings.

Press ENTER to select the ISF Day calibration settings.

Press ENTER to select the Custom 1 calibration settings, or scroll RIGHT and press ENTER to save settings you have made.

Press ENTER to select the Custom 2 calibration settings, or scroll RIGHT and press ENTER to save settings you have made.

Press ENTER to force the Presets back to their Factory Default settings.

Input Position

Left/Right

Up/Down

Width

Height

Overscan

ISF Presets

XISF Night

ISF Day

Custom 1 Save

Custom 2 Save

Factory Default

Information

Indicates selection has been made for the Information selection menu

Indicates the unit Serial Number on the front panel display.

Indicates the Hardware Version number on the front panel display.

Indicates the Firmware Version number on the front panel display.

Indicates the Firmware Version build date on the front panel display.

Information

Serial Num

 

 

Hardware

0

Firmware

0000.0000

Date

April 7 2004

28

Image 30
Contents VX-4000ci Projector Page Table of Contents Page Features Included AccessoriesIntroduction Product Disposal Information Intellectual Property Rights Read Before Using the Product Declaration of ConformityLimited Warranty Limited WarrantyEffective Warranty Date Features and Benefits Projector Description Top ViewInput Panel Side View Ceiling Mount DimensionsFront View Bottom ViewHorizontal Vertical and Lens Shift Vertical Lens Shift Up or DownHorizontal Lens Shift Left or Right Lens Shift Range Lens Option 1 Throw Distance 1.2 1.4 x Width of ScreenLens Option 3 Throw Distance 1.77 2.35 x Width of Screen Lens Option 5 Throw Distance 3.60 5.70 x Width of Screen Lens Adjustments Zoom / Focus / Shift Page ProntoNeo Remote Control Description Hard ButtonsBattery Installation and Replacement ProntoNeo Remote Control Usage DHD Controller Description Front PanelRear Panel Inputs System Control InterfaceQuick Set-up Guide Connection ExamplesProjector Configuration Overall Functional Description Menu Description and Navigation Opening ScreenAspect Ratio White Yellow Cyan Green Magenta Red Blue Input Position Lens Replacement Procedure Page Install New Lens Assembly Basic Troubleshooting Tips Problem Possible Cause SolutionImage appears too RS-232 Communications General InformationRS-232 Commands DescriptionBrightness Lens Dimensions Top View Side ViewDHD Controller Dimensions Top PanelSpecifications VX-4000ci ProjectorSupplied Accessories DHD ControllerPage RUMA-010130