Sim2 Multimedia RTX55 Technical Specifications, Display Optical General, Electrical

Page 18

3ADDITIONAL INFORMATION

TECHNICAL SPECIFICATIONS

DISPLAY

 

 

 

OPTICAL

 

GENERAL

 

Optical system:

optical engine based on 1 DMD™

Power supply cable:

(EU, UK and US); length 2 m

 

chip; sealed dust-proof housing

Power supply:

100 to 240 Vac, tolerance +/- 10%,

DMD™ panel:

TI HD2 0.8" 12° Dark Metal - 1280x720

 

frequency 48 to 62 Hz

 

pixels (aspect ratio 16:9)

Peak current:

30 A max

Projection lens:

UltraWide angle F/2.4

Consumption:

170 W max

Colour wheel:

6 segments (RGBRGB) - 9000 rpm max

Fuse:

T 3.15A H, 5 x 20 mm

Lamp:

120 W UHP - 6,000 hours*

Dimensions:

45": 1228 x 1108 x 373 mm (WxHxD)

Picture size:

45": 996x560 mm (39.2x22 in)

 

55": 1495 x 1218 x 421 mm (WxHxD)

 

55": 1218x685 mm (48x27 in)

Weight (approx.):

45": 65 kg

Brightness:

45": 500 cd/m2

 

55": 85 kg

 

55": 350 cd/m2

Operating Temperature:

10 to 35 °C

 

 

Transportation temperature:

-15 to 55 °C

*average value measured in the laboratory under optimal conditions;

Storage temperature:

-15 to 55 °C

can be reduced by improper use

Humidity:

20% to 95% non-condensing

 

 

Safety:

EN 60950, UL 60950

ELECTRICAL

 

Transportability:

desktop equipment

 

 

Electromagnetic

 

Input/Output:

3-channel fibre optic link

compatibility:

EN 55022 Class B

Control:

Panel (keypad), remote control

 

EN 55024

 

 

 

EN 61000-3-2

 

 

 

EN 61000-3-3

 

 

Transport:

IEC 68-2-31, IEC 68-2-32

DIGIOPTICAL IMAGE PROCESSOR

ELECTRICAL

Input signals:

2 COMPOSITE VIDEO (CVBS) RCA type connectors, gold-plated

1.0Vpp / 75 , negative synchronisation

2 S-VIDEO (Y/C)

4-pin mini-DIN connectors

Y: 1.0 Vpp / 75 , negative synchronisation

C: 0.286 Vpp / 75 , [NTSC nominal burst level] 0.3 Vpp / 75 [PAL, SECAM nominal burst level]

• 4 COMPONENTS (Y/Cr/Cb/H/V) - RGBHV 3 sets of 5 RCA connectors, gold-plated

1 set of 5 BNC type connectors, gold-plated

-Components signal

Y:1.0 Vpp / 75 , negative or 3-level synchronisation [HDTV]

Cr,Cb: 0.7 Vpp / 75 - RGB signal

R,B: 0.7 Vpp / 75

G:0.7 Vpp / 75 , separate H/V Sync or H+V Sync 1.0 Vpp / 75 , negative or 3-level synchronisation

[HDTV]

H,V: positive or negative TTL, 0.3-5 Vpp / 1 k

2 RGBHV (analogue RGB) female DB15HD connectors

R,B:

0.7

Vpp / 75

 

G:

0.7

Vpp / 75

, separate H/V Sync or H+V Sync

 

1.0

Vpp / 75

, negative or 3-level synchronisation

[HDTV]

H,V: positive or negative TTL, 0.3-5 Vpp / 1 k

• 1 DVI (digital RGB) DVI-D female connector

Input/Output:

3-channel fibre optic link

Control:

Panel (keypad), remote control, via RS232

 

from PC or home automation devices

Horizontal frequency:

from 15 to 110 kHz (up to UXGA, 85 Hz)

Vertical frequency:

48 -100 Hz

Video standards:

automatically selected (PAL B, G, H, I, M,

 

N, 60, SECAM, NTSC 3.58 and 4.43)

High definition video:

ATSC HDTV (480p, 720p, 1080i, 1080p)

Graphic standards:

VGA, SVGA, XGA, SXGA, UXGA

Deinterlacer:

Faroudja chipset, DCDi™, 3:2 pull down

 

sequence conversion

18

Image 18
Contents RTX Important Safety Instructions Table of Contents Introduction Page Installation Connecting the TWO UnitsConnecting the Video Sources VideoComponent / Rgbs Source Signal DigiOptical Image Processor Connector Control RS232 RGB GraphicsDVI-D Fibre Optic LinkSwitching on and OFF OperationRemote Control KeypadOn Screen Menu InputsPicture Image Setup Maintenance and Troubleshooting Maintenance and CleaningTroubleshooting Guide Remote control not working Video image showing colour misalignment on vertical detailsTechnical Specifications Display Optical GeneralElectrical Link Cable Dimensions Display Digioptical Image ProcessorOn Screen Menu Layout Picture