INFO
Displays the current status of the projector and information concerning the projected video/graphic signal.
This function is displayed on pressing the 
key on the remote control (or, in the absence of the On Screen Display, the ▶ key on the keypad).
QUICK MENUS
The quick menus provide access to the main adjustments that affect image quality without calling the main menu. Brightness, Contrast, Colour, Tint, Sharpnessand Filter adjustments appear at the bottom of the screen one after the other when the ▼ and
▲keys are pressed.
MESSAGES
The following messages could appear on your screen:
No Signal
The system does not recognise any signal applied to the se- lected input. In this case:
•Make sure the selected input is connected to a video or graphic signal and that that source is functioning cor- rectly.
•Check the condition of the cables used to connect the system to the various sources.
•Make sure the video or graphic signals supplied by the source are compatible with the system’s technical spe- cifications and, in particular, with those of the selected input.
Out of range
This message appears when either the resolution or the vertical/ horizontal frequency of the input signal exceeds system specifi- cations (e.g. a QXGA graphic signal) or when an input is supplied with an incompatible signal (e.g. after setting the components input to YCrCb 15kHz a progressive signal is connected).
24