Sigma AM-255 service manual Operating Instructions, Controls and Indicators

Page 12

3. OPERATING INSTRUCTIONS page 9

3.OPERATING INSTRUCTIONS

3.1.CONTROLS AND INDICATORS

The controls and indicators can be made to operate in several different ways. How they operate is controlled by the software installed.

The front panel contains the power LED, ready LED, alarm indicator LEDs, and the acknowledge switch. The power LED is on whenever the system has power. The ready LED shows that the system is clear of alarms and working properly. The alarm indicator LEDs blink when enabled, and indicate the following conditions:

Tamper:

Amber lamp indicates either a fault in the cable between the AM-255 and the portal monitor, or the tamper switch(s) in the pillar are activated. The tamper indication is also used to indicate a low battery condition when the AM-255 is used with TSA’s Personnel/Vehicle Monitors.

High Background Alarm:

When the radiation level exceeds the high alarm level that has been programmed into the system, the high background alarm is indicated.

Radiation Alarm:

When the system detects that the radiation level has exceeded the alarm threshold while the portal is occupied, the red radiation alarm lamp will illuminate and the audible alarm will sound.

Low Background Alarm:

The low background alarm indicates that the background counts are below the low background setting in the system. This could be caused by a detector failure or by shielding the pillar.

Model AM-255

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Alarm Monitor Model AM-255 Table of Contents MaintenanceTroubleshooting Theory of OperationAppendix Warranty Glossary Formulas Configuration Tracking Sheet PartsRecommended Spare Parts Spare Parts Ordering Information Introduction Scope and Purpose of ManualSpecifications Inspection and Setup InspectionSET-UP Procedures Wiring Instructions System #1 Input Signals Relay OutputsSystem #2 Input Signals Initial Setup Checklist Controls and Indicators Operating InstructionsSummary of Alarm Indications Summary of Alarm IndicationsOperation Unit Operation Components Maintenance Procedures Performance Verification Checklist Component Access Do not go to until the battery voltage is 12.4 or greater Troubleshooting Longs Peak Court LONGMONT, Colorado Appendix B. Glossary page20 Appendix B. Glossary page21 Activity from Counts Appendix C. Formulas page23 Appendix C. Formulas page24 Configuration Tracking Sheet System ModificationsLongs Peak Court LONGMONT,COLORADO Drawings Longs Peak Court

AM-255 specifications

The Sigma AM-255 is a cutting-edge, versatile piece of equipment designed to meet the demands of professionals across various industries. Known for its robust engineering and innovative technologies, the AM-255 stands out as a reliable solution for tasks requiring precision and efficiency.

One of the primary features of the Sigma AM-255 is its advanced processing capabilities. Equipped with a high-performance processor, the AM-255 is capable of handling complex calculations and data processing tasks with ease. This results in faster operation speeds, reducing downtime and allowing users to focus on their workload without the frustration of lagging performance.

The AM-255 also integrates state-of-the-art connectivity options. With multiple ports for USB, HDMI, and Ethernet, users can easily connect the device to various peripherals and networks. This flexibility is crucial for professionals who rely on external devices and need to transfer data seamlessly.

In terms of user interface, the AM-255 boasts an intuitive touch screen display that responds quickly and accurately to input. The interface is designed to simplify navigation, making it accessible even for those who may not be tech-savvy. This attention to user experience not only enhances productivity but also encourages proactive engagement with the system.

Another notable characteristic of the Sigma AM-255 is its durability. The device is engineered with high-quality materials that withstand harsh working conditions, making it ideal for fieldwork or industrial environments. Its rugged construction ensures longevity, minimizing maintenance costs and providing peace of mind for users.

Furthermore, the AM-255 features energy-efficient technologies, contributing to a lower carbon footprint. This aligns with global trends towards sustainability, allowing organizations to adopt more eco-friendly practices without sacrificing performance.

Security is also a top priority in the design of the Sigma AM-255. With advanced encryption protocols and secure user authentication features, the device protects sensitive data and prevents unauthorized access, which is crucial for businesses handling confidential information.

In summary, the Sigma AM-255 is a remarkable solution that combines performance, connectivity, user-friendliness, durability, energy efficiency, and security. These main features make it a valuable asset for professionals seeking to enhance their operational efficiency and productivity in today’s fast-paced, technology-driven environment. As new technologies continue to evolve, the Sigma AM-255 is well-positioned to adapt and meet future industry challenges.
Top Page Image Contents