Sterling SM3-615a operating instructions Maintenance

Page 16

SSK 5-DURO

4. Maintenance

»

L

SM3-615a

This chapter is intended for persons with skills in electrical and mechanical areas due to their training, experience and received instructions.

Personnel using the instructions in this chapter must be instructed of the reg- ulations for the prevention of accidents, the operating conditions and safety regulations and their implementation.

Ensure in each case that the personnel are informed accordingly.

For maintenance work taking place at heights of over approx.1828.8 mm (6 ft), use only ladders or similar equipment and working platforms intended for this purpose. At greater heights, the proper equipment for protection against falling must be worn.

Use only suitable lifting gear which is in proper working order and load sus- pension devices with sufficient carrying capacity. Do not stand or work under suspended loads!

Ensure that the electric motors/switch cabinets are sufficiently protected against moisture.

Use only suitable workshop equipment.

Before starting maintenance work, appoint a supervisor.

Inform the responsible personnel before maintenance work on the system is started.

Never operate the equipment when partially dismantled.

All maintenance and repair work not described in this chapter may only be carried out by Sterling service personnel or authorized personnel (appointed by Sterling).

Disconnect the equipment from mains supply before starting mainte- nance procedures to ensure that it cannot be switched on unintentionally.

Depressurize all compressed air piping of the equipment before starting maintenance work.

Maintenance 15

Image 16
Contents SSK 5-DURO Sterling Material ProcessingTechnical service Edition 10/01SSK 5-DURO Parts and Service Department Table of contents Safety instructions Safety instructionsSSK 5-DURO Explanations and information For your safety For the safety of the equipmentInstallation instructions Installation instructionsTransport Set-upCompressed-air supply only with compressed-air valves Electrical connection SSK 5-DURO Functional description Functional descriptionMaintenance MaintenanceSSK 5-DURO Maintenance intervals Servicing the hopper loaderReplace the sealing rings Nonreturn valveOutlet flap Adjust the flap switch Replacing the filter cartridge Cleaning the hopper Spare parts list Spare parts listSSK 5-DURO, complete SSK 5-DURO Pos Order no Designation Wear Code8786 93948988 Technical data Technical dataDimension Sheet Electrical manual

SM3-615a specifications

The Sterling SM3-615a is a sophisticated electric scooter designed for the modern urban commuter. This innovative vehicle blends advanced technology with ergonomic design, making it an ideal choice for navigating busy city streets.

One of the standout features of the SM3-615a is its powerful electric motor, which delivers efficiency and reliability. With a maximum output of 500W, the scooter can reach a top speed of 25 km/h, providing a swift and enjoyable riding experience. The motor is designed to be energy-efficient, allowing for longer rides on a single charge.

The battery system of the SM3-615a is another highlight, featuring a high-capacity lithium-ion battery that can be fully charged in just a few hours. This battery provides a remarkable range of up to 50 kilometers on a single charge, making it suitable for daily commutes or leisurely rides around town. The smart battery management system ensures optimal performance and longevity, protecting against overcharging and deep discharging.

In addition to its impressive performance metrics, the SM3-615a is equipped with cutting-edge technologies that enhance safety and usability. It features a dual-braking system that combines both electronic and mechanical brakes for efficient stopping power. The front and rear LED lights improve visibility during nighttime rides, while the integrated horn adds an extra layer of safety by alerting pedestrians and other road users.

The design of the Sterling SM3-615a prioritizes comfort and practicality. The scooter comes with a spacious deck that allows for secure footing while riding. The adjustable height handlebars ensure that users of varying heights can find their optimal riding position. Furthermore, the foldable design makes it easy to store and transport, perfect for urban dwellers with limited space or those who want to take their scooter on public transport.

Additional features include a digital display that provides real-time information on speed, battery life, and distance traveled, allowing riders to monitor their performance easily. The scooter also includes a customizable app integration that allows users to track their rides and even lock their scooter remotely.

Overall, the Sterling SM3-615a stands out in the electric scooter market with its blend of performance, safety, and user-friendly features. It's an ideal choice for those looking to optimize their daily commutes while reducing their carbon footprint.