Apex Digital AVL 2778 manual In-Picture Menu display menus, PIP Mode

In order to use the PIP feature you must take note of the input selected as the main (larger) picture. You should familiarize yourself with this page as not all inputs connected to the television are available using the PIP feature.

Picture-

How to

PIP Mode

Your LCD TV can display the main signal and an auxillary signal input simultaneously.

The PIP signal appears in a small box within the screen when the PIP feature is activated.

Refer to the chart at right as to the inputs allowed using PIP when viewing your main signal.

Main Signal

PIP Signal

To Activate PIP

While your main signal is on, press PIP INPUT on the remote control.

As an example, we will use YPbPr1 mode as your main signal.

While your main signal (TV) is displayed, press PIP input, on the remote, continuously until your input source displays a signal. An OSD will appear with the source input options available to display in the PIP box.

Press PIP INPUT on remote to select an input option.

Press SWAP to switch signal sources.

Press PIP SIZE to change the size of your PIP image.

Press PIP POS to reposition PIP image in other corners of your LCD TV display.

PIP Modes That Function Together are Checked below:

Main			PIP Signal
	TV	AV	SV	YPbPr	VGA	DVI
Signal
TV				α α α
AV				α α α
SVIDEO				α α α
YPbPr 1/2	α α α
VGA	α α α
DVI	α α α

IE: While in TV mode your PIP will display those signals connected to YPbPr, VGA and DVI only.

in-Picture Menu display menus