AMD GA-K8N ULTRA-9 user manual Using the Define a New Array Window, Selecting the RAID Mode

Page 68

English

Using the "Define a New Array" Window

If necessary, press the tab key to move from field to field until the appropriate field is highlighted.

Selecting the RAID Mode

By default, this is set to Mirroring. To change to a different RAID mode, press the down arrow key until the mode that you want appears in the RAID Mode box - either Mirroring, Striping, Spanning, or Stripe Mirroring.

Selecting the Striping Block Size

Striping block size is given in kilobytes, and affects how data is arranged on the disk. It is recommended to leave this value at the default Optimal, which is 64KB, but the values can be between 4 KB and 128 KB.

Assigning the Disks

The disks that you enabled from the RAID Config BIOS setup page appear in the Free Disks block. These are the drives that are available for use as RAID array disks. To designate a free disk to be used as a RAID array disk,

1. Tab to the Free Disks section. The first disk in the list is selected.

2. Move it from the Free Disks block to the Array Disks block by pressing the right arrow key ( ). The first disk in the list is moved, and the next disk in the list is selected and ready to be moved.

3. Continue pressing the right-arrow key ( ) until all the disks that you want to use as RAID array disks appear in the Array Disks block.

 

NVIDIA RAID Utility

Nov 5 2004

 

- Define a New Array -

 

RAID Mode: Mirroring

Striping Block: Optimal

Free Disks

Array Disks

Loc

Disk Model Name

Loc

Disk Model Name

 

 

 

2.0.M

ST3120026AS

 

[

] Add

2.1.M

ST3120026AS

 

[

] Del

 

 

 

[ESC] Quit [F6] Back [F7] Finish

[TAB] Navigate

[ ] Select [ENTER] Popup

 

 

 

 

 

GA-K8N Ultra-9 Motherboard

- 68 -

Image 68
Contents GA-K8N Ultra-9 Motherboard Copyright Product Manual ClassificationTable of Contents Drivers Installation GA-K8N Ultra-9 Motherboard Layout GA-K8N Ultra-9Block Diagram Page Considerations Prior to Installation Installation NoticesInstances of Non-Warranty Preparing Your ComputerFeature Summary SATA3SIIBios Installation of the CPU and Fan Heat Sink Installation of the CPUInstallation of the Fan Heat Sink Installation of Memory Dual Channel Memory Configuration Installation of Expansion Cards I/O Back Panel Introduction Side Speaker Out Connectors IntroductionRear Speaker Out ATX12V/ATX Power Connector 5 Cpufan / SYSFAN/ Pwrfan Cooler Fan Power Connector Nbfan Chip Fan Power ConnectorFDD FDD Connector IDE1 / IDE2 IDE ConnectorFaudio Front Audio Panel Connector Fpanel Front Panel Jumper Cdin CD In Connector PwrledUSB1 / FUSB2/FUSB3 Front USB Connector Ircir17 F11394/F21394 Ieee 1394 Connectors Clrcmos Clear CmosBattery English Status Page Setup Menu / Option Page Setup Menu Main MenuMain Menu For example Bios Ver. D1 „ Exit Without Saving „ Set User Password„ Save & Exit Setup IDE Channel 0 Master/Slave IDE Channel 1 Master/Slave Standard Cmos FeaturesTime Floppy 3 Mode Support for Japan Area Advanced Bios Features Hard Disk Boot PriorityFirst / Second / Third Boot Device Boot Up Floppy SeekPassword Check Init Display FirstIDE DMA transfer access Integrated PeripheralsOn-Chip IDE Channel0 On-Chip IDE Channel1On-Chip LAN Boot ROM IDE Prefetch ModeOn-Chip MAC Lan LAN IDE/SATA RAID functionOnBoard LAN Boot ROM On-Chip USBUSB Memory Type USB Keyboard SupportParallel Port Mode ECP Mode Use DMAOnboard IrDA Port Onboard Parallel PortPower Management Setup Power-On by AlarmPME Event Wake Up Modem Ring OnAC Back Function Power On By MousePower On By Keyboard PnP/PCI Configurations INTPC Health Status MB Intelligent TweakerM.I.T Load Optimized Defaults Set Supervisor/User PasswordHT-Link voltage control DDR voltage controlSave & Exit Setup Exit Without SavingDrivers Installation Install Chipset DriversSoftware Application Software InformationHardware Information Contact UsEnglish User Interface Overview Unique Software UtilitiesEasyTune 5 Introduction How to use the Xpress Recovery Xpress Recovery IntroductionWhat is Xpress Recovery ? F9 For Xpress Recovery Press F9 during powering on the computer. Text ModeRemove Backup Image  Remove backup image. Are you sure? Y/N Exit and RestartHow to use Dual Bios and Q-Flash Utility? Flash Bios Method IntroductionWhat is Dual Bios Technology? Wide Range Protection DisableDefault, Enable Boot From Main BIOSDefault, Backup BiosAuto Recovery EnableDefault, Disable Halt On Error DisableDefault, EnableMethod 1 Q-FlashTMUtility Before You BeginExploring the Q-FlashTM / Dual Bios utility screen Task menu for Dual Bios utilityEntering the Q-FlashTMutility Task menu for Q-Flash utilityUsing the Q-FlashTMutility StepsYou can repeat to Part Two Exploring the Q-FlashTMutility screen Task menu for Q-FlashTMutility FlashTMutility barCongratulation!! You have updated Bios successfully Bios file becomes F4 after updatingMethod 2 @BIOSTM Utility Methods and stepsEnglish Serial ATA Bios Setting Utility Introduction RAID LevelsConfiguring the Nvidia RAID Bios Entering the RAID Bios SetupUsing the Define a New Array Window Selecting the RAID ModeSelecting the Striping Block Size Assigning the DisksCompleting the RAID Bios Setup Array 2 Nvidia Mirror 111.79G Installing the RAID drivers Cd bootdrv Menu5 2- / 4- / 6- / 8- Channel Audio Function Introduction Introduction of audio connectorsStereo Speakers Connection and Settings Channel Audio Setup English English Jack-Sensing Introduction Auto-detectingManual setting Troubleshooting Contact Us Taiwan HeadquartersChina Shanghai

GA-K8N ULTRA-9 specifications

The AMD GA-K8N ULTRA-9 is a prominent motherboard that showcases the advancements in computing technology during its era. Designed for AMD's Athlon 64 processors, the GA-K8N ULTRA-9 exemplifies the transition to 64-bit computing, offering enhanced performance for both gaming and professional applications. This motherboard supports Socket 754, allowing users to harness the power of AMD's CPU architecture effectively.

One of the standout features of the GA-K8N ULTRA-9 is its support for dual-channel DDR memory, facilitating improved memory bandwidth and system performance. The motherboard typically offers four DIMM slots, accommodating up to 4GB of DDR400/DDR333/DDR266 memory. This capability enables users to experience smoother multitasking and a more responsive system.

The GA-K8N ULTRA-9 is equipped with NVIDIA's nForce3 250 chipset, providing robust integrated graphics capabilities and better overall system stability. The chipset also supports PCI-Express, which was a significant advancement over the older PCI standard, allowing for faster data transfer rates and improved performance in graphics cards and other expansion cards.

In terms of storage, the GA-K8N ULTRA-9 offers a variety of options with its four SATA ports, enabling users to connect multiple high-speed SATA drives. Furthermore, it includes support for RAID 0, 1, and 0+1, allowing for enhanced data redundancy and performance.

Connectivity is another area where the GA-K8N ULTRA-9 shines. The motherboard features an array of USB 2.0 ports, allowing users to connect multiple peripheral devices easily. Additionally, the integrated Gigabit Ethernet controller provides fast network connectivity, making it suitable for both gaming and productivity tasks.

When it comes to audio, the GA-K8N ULTRA-9 boasts an integrated 6-channel audio system, delivering high-quality sound output for an immersive gaming and multimedia experience. This makes it an excellent choice for users who value audio performance in their computing setup.

Overall, the AMD GA-K8N ULTRA-9 represents a significant step forward in motherboard technology, combining performance, compatibility, and advanced features. Its support for 64-bit processing, high-speed memory, and various connectivity options make it a reliable choice for users seeking to build a powerful and future-proof computer system. Whether for gaming, content creation, or general use, the GA-K8N ULTRA-9 remains a noteworthy contender in the landscape of early 2000s computing hardware.