AMD LV-651 user manual LAN Interface, Onboard Display Interface, Analog VGA Interface

Page 19

LV-651 User’s Manual

Hardware Setup

2.8 <LAN Interface>

The board integrates with one Realtek RTL8110S-32 Gigabit Ethernet controller. The Realtek RTL8110S-32 supports triple speed of 10/100/1000Base-T, with IEEE802.3 compliance and Wake-On-LAN supported.

USB_RJ45

2.9 <Onboard Display Interface>

The board integrates AMD Geode LX800 processor with built-in 2D video engine, to provide onboard DB15 VGA connector, 24-bit TFT and 18-bit/24-bit LVDS interface. The built-in 2D video engine supports following specified functions:

●High-performance 2D graphics controller

●Alpha BLT

●Integrated dot clock PLL

2.9.1 <Analog VGA Interface>

Please connect your CRT or LCD monitor with DB15 male connector to the onboard DB15 female connector on rear I/O port.

CRT

LAN Interface

19

Image 19

Contents LV-651 Trademark DisclaimerPrinted Matters Packing ListHardware Cable KitChapter Introduction………………………………………………………………7 Chapter ＜Hardware Setup ＞………………………………………………………12CPU and Memory Setup………………………………………………..15 IndexAppendix C System Resources…………………………………………….….45 Appendix B Flash BIOS…………………………………………………………43Is Left For Blank Product Overview IntroductionEthernet Interface Product SpecificationMulti-I/O Port VGA Display InterfaceOrdering Code Power and EnvironmentAudio Interface Expansive InterfaceMechanical Drawing TFT/LVDS LCD Block DiagramConnector Location Hardware SetupJumper Function Jumper ReferenceInternal Connector Connector ReferenceExternal Connector CPU Setup CPU and Memory SetupMemory Setup Jrtc Mode Cmos SetupEnhanced IDE & CF Interface Floppy Port Onboard Display Interface LAN InterfaceAnalog VGA Interface Pin Description Digital DisplayBit single Pin Signal 18-bit Signal 24-bitTCLK1 TCLK1+ Pin Signal Preparing the LV-651,LCD panel and the backlight inverter LCD Installation GuidePanel Number Resolution Onboard Audio Interface Interface USB2.0 11 USB2.0 InterfaceVCC Gpio Interface Serial Port Jumper Setting JCSEL1 JCSEL2 PIN assignment Power and Fan ConnectorPower Input Power OutputFan Connector PIN Indicator and SwitchThis Page is Left For Blank 1CMOS Setup Utility Main Screen Bios SetupThis Page is Left for Blank IDE Port Appendix a I/O Port Pin AssignmentSerial Port Pin Description MI0+ MI1+ MI2+ MI3+ CRT PortLAN Port USB PortLPT Port PS/2 Keyboard & Mouse PortPin This Page is Left for Blank Bios Auto Flash Tool Appendix B Flash BiosFlash Method C1.I/O Port Address Map Appendix C System ResourcesLV-651 User’s Manual System Resources Port Address Map C2.Memory Address Map C3.System IRQ Resources Program Sample Appendix D Watch Dog timer SettingThis Page is Left for Blank Contact Information