Routing protocols, Ordering information

Routing protocols

•OSPF

¬RFC 1370 Applicability Statement for OSPF

¬RFC 1587 OSPF NSSA Option

¬RFC 1765 OSFP Overflow Graceful Handling

¬RFC 2328 OSPFv2.0 Protocol

¬RFC 2370 Opaque LSA Option

¬RFC 3101 OSPF NSSA Option

¬RFC 3630 OSPF Traffic Engineering

•Routing Information Protocol (RIP)

¬RFC 1058 RIP Version 1.0

¬RFC 2082 RIP Version 2.0

¬RFC 2453 RIPv2.0 MD5 Authentication

•MPLS

¬RFC 2702 Requirements for Traffic Engineering over MPLS

Table 2. Ordering information

¬RFC 3031 MPLS Architecture

¬RFC 3032 MPLS Label Stack Encoding

¬RFC 3063 MPLS Loop Prevention Mechanism

¬RFC 4090 MPLS Fast Reroute - Facility Backup Method

¬RFC 4447 Pseudowire Setup and Maintenance Using the Label Distribution Protocol (LDP) FEC 128 Support

¬RFC 4448 Encapsulation Meth- ods for Transport of Ethernet over MPLS Networks

•LDP

¬RFC 3036 LDP Specification

¬RFC 3037 LDP Applicability

•RSVP-TE

¬RFC 2430 A Provider Architec- ture for DiffServ and TE

¬RFC 3209 Extensions to RSVP for LSP Tunnels

¬RFC 3210 Applicability State- ment for Extensions to RSVP for LSP Tunnels

•VPLS

¬RFC 4762 Virtual Private LAN Service (VPLS) using Label Distribution Protocol (LDP) Signaling

•Ethernet Pseudowire

¬IETF draft as defined in draft- ietf-pwe3-ethernet-encap-11

•LSP Ping

¬Draft-mpls-lsp-ping-3 LSP ping draft version 3

¬Draft-mpls-lsp-ping-7 LSP ping draft version 7

•Bi-directional Forwarding Detection

¬Draft-ietf-bfd-base-05

¬Draft-ietf-bfd-v4v6-1hop- 06 BFD for IPv4 and IPv6 (single hop)

•Terminal Access Concentrator Access Control Server Plus (TACACS+)

¬IEFT draft as defined in draft- grant-tacacs-02

•SSH

¬IETF draft of SSH Authentication Protocol

¬IETF draft of SSH Connection Protocol

¬IETF draft of SSH Transport Protocol

•RADIUS

¬RFC 2865 Remote Authentication Dial In User Service

¬RFC 2866 RADIUS Accounting

Ordering Code	Item Name	description
3HE03250AA	7250 SAS ESA with software	•	7250 SAS chassis with 2 SFP GigE uplink ports supporting enhanced services with 2 SFP GigE,
			12 SFP 100Base-FX and 8 10/100Base-T Ethernet interfaces; 2 slots for CES modules; and 4 dry
			contact inputs through a DB-9 interface
		• Optical ports require SFPs
		• Power supplies are not included; up to 2 can be installed
		• Software includes support for enhanced MPLS, H-QoS, CES and OAM

3HE01189AA	7250 SAS ES with software	•	7250 SAS chassis with 2 SFP GigE uplink ports supporting enhanced services, with 2 SFP GigE,
			12 SFP 100Base-FX and 8 10/100Base-T Ethernet interfaces and 2 slots for CES modules
		• Optical ports require SFPs
		• Power supplies are not included; up to 2 can be installed
		• Software includes support for enhanced MPLS, H-QoS, CES and OAM

3HE01190AA	CES Access Module	•	Access module with 4-port E1/T1 CES
		• Connector RJ-48 (balanced)
		•	Distance: 200 m
		•	TCXO variant
		• Up to 2 modules can be installed per chassis

3HE01544AA	High Performance CES Access Module	•	Access module with 4-port E1/T1 CES
		• Connector RJ-48 (balanced)
		•	Distance: 200 m
		• High Performance Clock Recovery (HPCR) with OCXO variant
		• Up to 2 modules can be installed per chassis

3HE01191AA	-48V DC Power Supply	•	-48 V DC power supply (one is required; a second is required for optional redundancy)

3HE01192AA	110-220V AC Power Supply	•	110 V to 220 V AC power supply (one is required; a second is required for optional redundancy)

3HE00062AA	PBA GigE TX SFP Copper Module	•	1-port 1000Base-TX SFP Copper Module
		•	Cat5
		•	RJ-45 connector

Alcatel-Lucent 7250 SAS Data Sheet